1/2 In. Drive Split Beam Torque Wrenches
A split beam torque wrench is a click type wrench that is set with a dial or knob on a second beam, rather than by compressing a long spring inside the handle. When the set torque is reached, the head breaks over with a click you can hear and feel. This category holds 1/2 in. drive split beam click wrenches, with scales in foot-pounds or metric units such as kg.m, for wheel, suspension, driveline and engine fasteners. Auto and truck technicians, tire shops, fleet shops and industrial maintenance crews use them.
How split beam wrenches differ
On a standard click wrench, the spring stays loaded at the set value and should be backed off after use. A split beam design does not hold a spring under load, so it can be stored at any setting, and changing the setting between fasteners is quick. That makes it handy on jobs that move back and forth between two or three torque values.
Choosing a wrench
Pick a range where your common torque values fall near the middle, not at either end, since a torque wrench reads most consistently there. The 1/2 in. drive covers mid-range fasteners such as lug nuts, suspension bolts and many engine and transmission bolts. Check the scale units, the overall length and the head style before ordering.
Using them
Pull smoothly on the handle grip, at a right angle to the wrench, until the click, then stop. Do not keep pulling past the click, and never use a torque wrench to break fasteners loose. Have the wrench checked on a tester on a regular schedule; testers are in Torque Testers - Certification, and smaller wrenches are in Split Beam Wrenches - 3/8 in.
Brands here include Precision Instruments, Proto, GearWrench, Central Tools and OTC.



















































Follow us on social media