Air Hose Reels
An air hose reel stores compressed air hose on a drum and pays it out to the work area, then winds it back when the job is done. Keeping hose coiled on a reel gets it off the floor, where it is a trip hazard and gets run over, kinked and cut. Auto repair shops, tire shops, fleet and diesel shops, body shops and industrial plants mount reels at each bay or work station that runs air tools.
Types of reels
Spring driven reels rewind on their own: a latch holds the hose at the length pulled out, and a short tug releases it to retract. Open reels make the hose easy to see and service, while enclosed reels shield the hose and spring from dirt and damage. Reels mount on a wall, ceiling, bench or service truck. Reels are also made for oil, grease and water, so check that a reel is meant for air before buying.
Choosing and maintaining a reel
Match the hose inside diameter and length to the air tools that will be used; a longer or narrower hose delivers less air at the tool. Mount the reel where the hose can pull straight out without rubbing on an edge. Set the hose stop so the fitting does not slam into the reel when it rewinds, and walk the hose back rather than letting it fly. Replacement hoses sized for specific reels, along with reel parts, are in this category too, so a worn hose can be swapped without replacing the reel.
Related categories
Hoses, couplers, plugs and fittings for the rest of the air system are in the Air Hoses and Air Couplers and Fittings categories, and filters and regulators are under Air Filters Regulators Dryers. A reel at each bay, fed from a filtered and regulated air drop, keeps air tools supplied without running long hoses across the shop floor.
Brands here include Zeeline, Samson, BluBird, Balcrank, Reelcraft and Legacy.

























.jpg)






















Follow us on social media