Bushing Tools for Driveline and Suspension
Bushings line pivot points in transmissions, linkages, control arms, spring hangers and truck chassis, and they have to be pressed out and in without damaging the bore. This category holds bushing drivers, bushing service sets, control arm bushing sets and pin and bushing adapters, mostly for transmission, suspension and heavy truck work. Transmission shops, auto repair shops and fleet and heavy truck shops use them.
Choosing the right type
Driver sets use a handle and a range of stepped discs that fit the inside and outside diameter of a bushing, for driving or pressing it into a housing. Bushing service sets use a threaded rod, receiving cups and adapters to pull a bushing out and draw the new one in, often with the part still on the vehicle. Pin and bushing adapters for heavy trucks fit a specific spring or cab pin and are used with a press or puller. Match the driver or cup to the bushing size or application in the product name.
Driver or puller
A driver set is quick when the housing is off the vehicle and can sit on a bench or in a press. A threaded service set gives more control on the vehicle, where there is no room to swing a hammer and the bore must not be shocked. Many shops keep both.
Using them
Clean and inspect the bore before installing a new bushing. Drive or draw the bushing in straight, since a cocked bushing will gall the bore. Use the step that matches the outer shell so force goes on the shell, not the rubber or liner. Some bushings need a lubricant and others must go in dry, so follow the instructions that come with the part. Seal tools are in Seal Removal and Installation.
Brands here include OTC, Tiger Tool, Gedore, Mopar, Kent-Moore and Schley.

















































Follow us on social media