Bead Rollers and Bead Roller Dies
A bead roller feeds sheet metal between a pair of shaped dies, pressing a raised bead, step or flange into the panel as the handle is turned. Beads stiffen flat panels so they do not drum or flex, and flanges and hems prepare edges for joining or give a finished edge. This category holds manual bead rollers in several throat depths, such as 24 in. models, along with round, step and hem roll die sets and replacement parts such as round bead steel.
Choosing a roller and dies
Throat depth sets how far from the panel edge a bead can be rolled, so deeper throats suit larger floor pans and firewalls. The dies decide the shape: round dies make raised beads, step dies make offset flanges where panels overlap, and hem roll dies fold an edge over. Check that a die set fits the shaft size of the roller before buying.
Using a bead roller
Lay out bead lines on the panel first, start with light die pressure and make more than one pass to deepen the bead, and guide the sheet steadily so lines stay straight. A fence or guide helps on long, parallel beads.
Restoration shops, hot rod and custom fabricators, race car builders and body shops use bead rollers to make floor pans, firewalls, door skins and patch panels. Hobbyists use them for custom panels and trim.
The bead rollers and dies here come from Woodward Fab and FilmTech. For English wheels and anvils, see Metal Fabrication in Paint and Body.
















































Follow us on social media