HVLP Spray Guns
HVLP stands for high volume, low pressure. An HVLP spray gun atomizes paint with a large volume of air at low pressure at the air cap, which cuts overspray and puts more of the material on the panel instead of in the booth filter. This category includes full size gravity feed HVLP guns, mini and touch-up guns for spot repairs, door jambs and small parts, spray gun kits with more than one fluid tip, and repair kits with needles, nozzles and air caps. Collision repair and body shops, restoration shops, fleet and equipment painters and serious hobby painters use HVLP guns for primer, base coat and clear coat.
Choosing the right gun
Full size guns cover panels and complete vehicles, while mini guns give control on small repairs and tight areas. The fluid tip size decides how much material flows: smaller tips suit base coats and thin materials, and larger tips suit primers and heavier materials. Several kits here include two nozzle sizes, such as 1.4mm and 1.7mm, so one gun can handle both. Check the paint maker data sheet for the tip size and inlet pressure it recommends.
Air supply and setup
HVLP guns need a good volume of clean, dry air, so the compressor, hose and fittings must keep up with the gun. Use a regulator at the gun inlet, filters and water separation in the air line, and adjust fan width and fluid flow before spraying the vehicle.
Care and repair
Clean the gun right after each use, and never soak the whole gun in solvent. Needle, nozzle and air cap sets are matched parts; replace them together when spray patterns go uneven or the gun drips. Spray gun accessories, gun cleaning equipment, conventional guns, LVLP guns, nozzles and disposable cups are in the sibling categories under Spray Guns.
Brands we carry
HVLP spray guns and repair kits here come from SATA, Sharpe, DeVilbiss, Iwata, Astro Pneumatic and Titan, with more from 3M and ATD.










































Follow us on social media