Torque Wrench Interchangeable Heads and Adapters
Many torque wrenches have a removable head that slides into the end of the wrench. Swapping heads lets one wrench tighten fasteners with a ratchet, an open end or a box end, so a single calibrated tool covers jobs that would otherwise need several wrenches. This category holds those interchangeable heads and the adapters that connect them: ratcheting square drive heads, open end and ratcheting open end heads, 12 point box end heads with straight and offset shanks, and shank adapters that let a head made for one fitting work on another. Aviation shops, industrial assembly lines, fleet and heavy equipment shops and calibration labs use them where controlled torque is part of the work.
Matching the fitting
Interchangeable heads are made for a specific shank or fitting type, often named by a letter, such as the J shank seen on many heads here. Check which fitting your wrench takes and pick heads to match, or use an adapter between two fitting types. Then choose the head type and size: SAE or metric opening, point count, and offset angle where the head is bent to clear obstructions.
Head length and torque settings
A head that changes the distance from the wrench pivot to the fastener changes the torque applied at a given setting. Many torque wrenches with interchangeable heads are calibrated with a head of a standard length, so a longer head, an offset head or an added adapter may call for a correction to the setting. Follow the wrench maker's instructions and calculation for the head you are using, and check the result on a torque tester when in doubt.
Care
Keep head shanks clean and fully seated, and replace heads with worn jaws or ratchet mechanisms. Torque testers, torque wrenches and multipliers are in the neighboring Torque Wrenches categories.
Brands we carry here include CDI, Stahlwille, Precision Instruments, Proto and OTC.








































Follow us on social media