Rivet Nuts
A rivet nut, also called a nutsert, is a threaded insert installed from one side of a panel. It goes into a drilled hole, and a rivet nut tool pulls on the threads so the body collapses and clamps behind the sheet. The result is a machine-screw thread in sheet metal, tubing or panels too thin to tap, with no access needed to the back side. Body shops, upfitters, trailer builders and fabricators use them to mount trim, racks, brackets and accessories.
Choosing the right one
Match the thread size, such as 1/4-20 or 5/16-18, to the bolt, and match the grip or panel range to the material thickness so the nut sets tight. Drill the hole to the size the rivet nut calls for. Some vehicle-specific nuts, such as roof rack nutserts with sealer, replace a factory part.
We carry rivet nuts from Disco and Auveco. Riveters and blind rivets are in the neighboring Riveters and Rivets categories.






Follow us on social media