Electric Polishers
Electric polishers spin or oscillate a pad loaded with compound or polish to remove scratches, swirl marks and oxidation from paint and clear coat. Body shops, paint shops, detailers and car dealers use them for paint correction after repairs and for reconditioning. This category also includes complete polisher kits and a wet stone polisher used for countertop and stone work.
Rotary or random orbital
A rotary polisher spins the pad on a fixed axis. It cuts fast and removes deep defects, but it builds heat quickly and takes practice to keep from burning through paint or leaving holograms. A random orbital or dual action polisher moves the pad in an orbit while it spins, which spreads the heat and is much easier to control. Many shops use a rotary for heavy cutting and an orbital for finishing, and long-throw orbitals cover more area with each pass. Pad size matters too; smaller pads reach curves and tight panels, larger ones cover hoods and roofs.
Using a polisher
Start at a low speed to spread compound across a small section, then raise the speed to work it. Keep the pad flat, move in overlapping passes and let the machine do the work instead of pressing down. Clean or change pads often, and use separate pads for compounding and polishing so grit is not carried into the finish step.
Brands here include Rupes, Makita, DeWALT, 3M, Milwaukee and Porter-Cable. Pneumatic models are in Air Polisher / Buffer under Air Tools, and sanders for paint prep are in Sanders under Electric Power Tools.














































Follow us on social media