Cutoff Wheels
A cutoff wheel is a thin abrasive disc that cuts through metal by grinding a narrow slot as it spins. Mounted on an angle grinder, an air or electric cutoff tool or a chop saw, it cuts exhaust pipe, rusted bolts and nuts, sheet metal, rod, tubing and brackets. This category holds cutoff wheels in a range of diameters and thicknesses, from very thin 1/32 in. wheels for small cutoff tools to 4-1/2 in. wheels for angle grinders, sold singly, in small packs and in bulk boxes. Auto repair and body shops, exhaust and muffler shops, fabricators and industrial maintenance crews go through them quickly.
Choosing a wheel
Match the wheel diameter and arbor size to the tool, and make sure the wheel is rated for at least the tool speed. Thinner wheels cut faster and leave a narrow kerf with less heat, while slightly thicker wheels last longer and stand up to rougher use. Flat Type 1 wheels suit straight cuts with the right guard, and the abrasive grain matters too: premium ceramic grains such as those in 3M Cubitron II wheels are made for faster cutting on hard steel. Some wheels are made for stainless or for metal and masonry; the product names say which.
Cutting safely
A cutoff wheel is made to cut with its edge only. Never grind with the side of a thin wheel, since side pressure can shatter it. Keep the guard in place, wear eye and face protection, let the wheel reach speed before it touches the work, and let it cut without forcing it. Throw away a wheel that is chipped, cracked or has been dropped. For shaping and weld removal, use the Grinding Wheels category, and for cleaning before welding, see Wire Wheels and Cups.
Brands we carry here include Forney, Norton, DeWALT, Makita, 3M and Milwaukee.







.gif)
















































Follow us on social media