Free shipping on orders overFree shipping over $250 Lower 48 states and DC. Excludes freight and oversize.

Spark Plug

Spark plug sockets, boot and wire pullers, rethreading kits and gap tools for removing, installing and servicing spark plugs.

Featured Products - Spark Plug

Best Selling Products - Spark Plug

(image for) Spark Plug Insert - 7/8-18 - 5/Pk
Spark Plug Insert - 7/8-18 - 5/Pk
Heli Coil Products K518-12
Your Price: $36.94
(image for) Ford Triton Spark Plug Porcelain Extractor
Ford Triton Spark Plug Porcelain Extractor
Cal-van Tools 39200
Your Price: $24.77
(image for) Spark Plug Boot Puller
Spark Plug Boot Puller
Kent-Moore J-43094
Your Price: $181.55
(image for) 3305PZ-14 3/8 Square Drive Z-Series 12 Point Magne...
3305PZ-14 3/8 Square Drive Z-Series 12 Point Magne...
Koken
Your Price: $27.65
List Price: $35.84
23% off
(image for) Ford Triton Spark Plug Extractor
Ford Triton Spark Plug Extractor
Cal-van Tools 39100
Your Price: $76.55
(image for) Spark Plug Boot Pliers
Spark Plug Boot Pliers
K Tool International KTI70750
Your Price: $12.31
(image for) Spark Plug Gap Tool .020-.100 Inch
Spark Plug Gap Tool .020-.100 Inch
Lisle 67870
Your Price: $4.60
(image for) 90 Degree Spark Plug Boot Puller Pliers
90 Degree Spark Plug Boot Puller Pliers
SE Tools 824L-90
Your Price: $27.23
(image for) 12 PC. 3/8'' DR. MAGNETIC SPARK PLUG MASTER SET...
12 PC. 3/8'' DR. MAGNETIC SPARK PLUG MASTER SET...
VIM Tools MSPM100
Your Price: $230.31
(image for) T-100 Torx Socket - T-100 Socket, 3/4" Drive
T-100 Torx Socket - T-100 Socket, 3/4" Drive
Assenmacher Specialty Tools 6500 T-100

Spark Plug Tools

Spark plug tools cover each step of removing, checking and installing spark plugs. This category is divided into four subcategories: sockets, rethreading tools, boot removers and gappers. Auto repair technicians, small engine and marine shops, fleet shops and DIY mechanics use them during tune-ups, misfire repairs and coil and plug wire replacement.

The four subcategories

Spark Plug Socket holds sockets made for plugs: thin-wall bodies that slip into narrow plug wells, extra-long sockets for deep wells, and magnetic or rubber-insert sockets that hold the plug so it does not fall out on the way in or out. Sizes such as 5/8 in. and 18mm show up across the range, in 3/8 in. drive and other drives. Spark Plug Rethreading holds thread chasers, taps and insert kits that repair damaged threads in the cylinder head. Spark Plug Boot Removers holds pliers and pullers that grip plug wire boots and coil boots so they come off without tearing the wire. Spark Plug Gappers holds gauges for checking and setting the electrode gap.

Using them well

Let the engine cool before removing plugs, especially from aluminum heads. Blow debris out of the plug well before the plug comes out so dirt does not fall into the cylinder. Start new plugs by hand, or with a rubber hose or socket extension, so they cannot cross-thread, and tighten them to the vehicle specification. Pull on the boot, not the wire. Check the gap against the plug maker or vehicle specification before installation; some plugs come pre-gapped and are easily damaged by forcing a gap tool between the electrodes.

When threads are damaged

A chaser cleans up dirty or slightly damaged threads. Stripped threads call for an insert kit, which taps the hole oversize and installs a threaded insert back to the original size.

Brands we carry here include Heli-Coil, Bahco, Lisle, NEPROS, CTA and SK. Other ignition tools are in the sibling Ignition Tools category.