Air Drills
Air drills are drills powered by compressed air instead of a cord or battery. They are light for their power, run continuously without overheating a motor or draining a battery, and suit shops that already have an air system. This category includes 3/8 in. and 1/2 in. chuck air drills, light duty and industrial models, reversible models and drills with keyed or keyless chucks.
Chuck size and speed
A 3/8 in. drill is light and quick for drilling sheet metal, brackets and small holes in body and assembly work. A 1/2 in. drill turns larger bits and hole saws with more torque and less speed, for frames, heavy brackets and thicker steel. Reversible drills can back out a stuck bit and drive or remove fasteners. Keyless chucks change bits by hand, while keyed chucks clamp harder on large bits.
Air supply and care
An air drill needs steady pressure and volume at the tool, so use a hose and coupler large enough for the drill and a regulator set to the pressure the maker lists. Put a few drops of air tool oil in the inlet each day, and drain water from the compressor and lines so moisture does not rust the motor.
Who uses them
Air drills are used by auto repair and body shops, fleet and truck shops, fabricators and industrial maintenance and assembly lines for drilling holes in sheet metal, frames and brackets. Spot weld drills, air screwdrivers and other air tools are in the nearby Air Tools categories.
Hold the drill square to the work, center punch the hole first so the bit does not wander, and let the bit cut at its own rate. Sharp bits and cutting fluid on steel keep holes clean and bits lasting longer.
Brands we carry here include Chicago Pneumatic, Ingersoll Rand, Sioux, Florida Pneumatic, Astro Pneumatic and Aircat.
























































Follow us on social media