3-1/2 In. Drive SAE Impact Sockets
3-1/2 in. drive is one of the largest square drive sizes made for impact sockets. These sockets fit the very large nuts and bolts on mining and construction equipment, large presses, power generation equipment and other heavy industrial machinery, and are turned with large impact wrenches and torque multipliers. This category holds individual sockets in SAE fractional sizes measured in inches, with openings above 6 in., such as 6-7/16 in., 6-9/16 in., 6-13/16 in. and 9-1/16 in., so a shop can buy only the sizes it needs or replace one lost from a set.
Choosing the right socket
Measure the nut across the flats and match the SAE size exactly; at this scale a loose fit can round a costly fastener. Confirm that the driving tool has a 3-1/2 in. square drive, or plan for a drive adapter rated for impact use. Check the space around the nut, since sockets this large have thick walls and a large outside diameter.
Using them
Impact sockets are made to take the hammering of impact tools; chrome hand sockets should not be used on impact wrenches. Sockets of this size are heavy, so plan the lift and support the tool and socket during the job. Keep the drive end clean and use the retaining pin and ring set the tool calls for.
Heavy equipment shops, mining and industrial maintenance crews and power generation technicians use these sockets. The sockets here are from Genius. Metric sizes in the same drive are in the Metric Individual category next to this one.









































.jpeg)




Follow us on social media