Torque Sticks and Torque Limiting Extensions
Running wheel nuts down with an impact wrench is fast, but an impact can easily over-tighten them, which can stretch studs and warp brake rotors and drums. Torque sticks solve that by limiting how much torque the impact can pass to the nut. This category holds torque sticks, torque limiting extensions, torque limiting lug nut sockets and sets, and related charts. Tire shops, auto repair technicians, fleet and truck shops and roadside service crews are the main users.
How a torque stick works
A torque stick is an impact extension with a shank sized to twist a set amount under each impact blow. Once the nut reaches the stick's rated torque, the shank flexes and absorbs further blows instead of passing them to the nut. Each stick is rated for one torque value, often marked on the bar and coded by color, and product names here list ratings such as 100 ft-lb and 475 ft-lb. Torque limiting sockets put the same idea into a socket with the lug nut size built in.
Choosing the right stick
Pick the stick by the drive size of your impact, the nut size, and the torque the vehicle maker specifies for the wheel. Passenger car work is mostly 1/2 in. drive, while trucks use 3/4 in. and 1 in. drive. Sets cover the common car and light truck values in one case.
Using them
Start nuts by hand, run them down in a star pattern, and use the impact power setting the stick maker recommends. Torque sticks get close to the target but are not a precision tool, so many shops finish with a calibrated torque wrench and recheck after the first drive.
Brands we carry here include SureWerx, LTI, Grey Pneumatic, Koken and Williams. Lug nut sockets and wrenches are in the category next to this one.


















































Follow us on social media