Body Hammers and Dollies
Body hammers and dollies work as a pair to straighten dents and reshape sheet metal: the dolly is held behind the panel while the hammer works the front. This category covers bumping and finishing hammers, soft face hammers, dollies in many shapes, body spoons, slappers and other panel shaping tools, sets, and larger metal shaping equipment such as English wheels.
Choosing the right type
Bumping hammers have a broad face for moving metal back into rough shape, and finishing hammers have a smaller, flatter face for the final smoothing. Pick hammers raise small low spots, and soft face hammers move metal without marking it. Dollies come in many shapes, from general purpose to heel, toe and curved designs; the right one matches the crown of the panel behind the damage. Body spoons spread a blow over a wider area or pry from behind where a dolly will not fit, and slappers flatten broad areas without stretching them. English wheels shape flat sheet into smooth compound curves for new panels and patch pieces.
Using them
Hammering on dolly, with the dolly directly behind the hammer blow, flattens and slightly stretches metal. Hammering off dolly, with the dolly held just beside the blow, raises low areas and lowers high ones without stretching as much. Start with light blows, work from the outer edge of the damage inward, and check progress often by hand and with a file or sanding block. Too many heavy blows on dolly can stretch a panel so it oil cans, which then needs shrinking.
Sets and care
Starter sets combine a few hammers and dollies for common work, while body shops add specialty shapes over time. Keep hammer and dolly faces smooth and clean, since any nick transfers to the panel.
Collision repair shops, body shops, restoration shops, custom fabricators and hobby builders use these tools for dent repair, panel straightening and shaping new metal. Brands we carry here include Martin, S&G Tool Aid, Majestic, Woodward Fab, Williams and Dent Fix.






















































Follow us on social media