1/2 In. Drive SAE Impact Sockets
1/2 in. drive is the size most shops use on an impact wrench, covering lug nuts, suspension and steering bolts, driveline fasteners and engine and accessory hardware. This page lists individual SAE (fractional inch) impact sockets, for replacing a lost socket, filling a gap in a set or keeping a spare of the sizes that see the most use. Auto repair shops, tire shops, fleet shops, industrial maintenance crews and DIY users run them on air, electric and cordless impact wrenches.
Choosing the right socket
Point count comes first. Six point sockets hold the flats of a nut or bolt head and resist rounding, which suits the high, sudden torque of an impact wrench. Twelve point sockets fit more angles and suit 12 point flange bolts. Length is next: standard sockets keep the wrench close to the fastener, and deep sockets reach nuts on long studs and threaded rod. Swivel impact sockets build a universal joint into the socket for bolts set at an angle.
Impact versus chrome
Impact sockets have thicker walls and a finish made for repeated blows, while chrome hand sockets are made for the steady pull of a ratchet. A chrome socket on an impact wrench wears quickly and can split. Pair impact sockets with impact rated extensions, adapters and universal joints, and seat the socket fully before pulling the trigger.
Reading the listings
Product names give the drive, size, point count and length, for example 1/2 in. drive 6 point swivel 15/16 in. Check the fastener size with a hand wrench if you are not sure of it, and look at the clearance around it before choosing a deep or swivel socket. For complete size runs, see the SAE Sets category alongside this one, and Metric Individual for metric sizes.
Brands we carry here include Grey, Sunex, Williams, Genius, K Tool and SK, with Milwaukee and GearWrench sizes as well.























Follow us on social media