A/C Adapters, Couplers and Fittings
Automotive air conditioning work depends on tight, leak-free connections between the vehicle, service hoses, gauges, recovery machines and test equipment. This category holds the small parts that make those connections: service couplers, adapters between fitting sizes and refrigerant types, line unions and splices in SAE and metric sizes, block offs, and replacement fittings for service equipment. A/C technicians, auto repair shops, and fleet and heavy-duty truck shops all keep a drawer of them.
What each part does
Couplers connect service hoses to the high and low side service ports. Adapters let one set of gauges or one machine work with different port styles and refrigerants. Unions and splices join a repaired section of line to the original, which saves replacing a whole hose or tube for one damaged spot. Block offs seal an open line or component port, so a technician can pressure test or flush one part of the system at a time and keep dirt and moisture out while parts are off.
Choosing the right fitting
Fittings are made for a specific line size, thread and seal style, and many are listed in both SAE and metric sizes, so check the product name against the line or port you are working on. Systems that use different refrigerants also use different service port couplers, and equipment made for one is not meant for the other. Replacement O-rings and seals should suit the refrigerant and oil in the system.
Good practice
Cap open lines right away, use fresh seals on every joint, lubricate O-rings as the system maker calls for, and leak test after any repair. Keep fittings sorted by size and type in a labeled drawer, so the right part is at hand when a line comes apart.
Brands we carry here include SUR&R, Mastercool, Robinair, CPS Products, FJC and Uview, with more from Kent-Moore and OTC.













































Follow us on social media