1 In. Drive SAE Impact Sockets
1 in. drive impact sockets fit the heavy impact wrenches used on the largest fasteners in a shop: truck and bus wheel nuts, heavy equipment track and frame bolts, agricultural machinery, mining equipment and industrial plant hardware. This category holds individual SAE (fractional inch) sizes in standard and deep lengths, in 6 point and 12 point styles, including large sizes over 2 in. Fleet and diesel shops, heavy truck tire service, equipment dealers and industrial maintenance crews are the main users.
Choosing the right socket
Six point sockets grip the flats of a nut and resist rounding under heavy impact, and they are the usual pick for big fasteners. Twelve point sockets fit more positions and match 12 point bolt heads. Deep sockets reach nuts on long studs and through wheel openings, while standard lengths keep the heavy wrench close to the work and reduce wobble. Check the fastener size and the clearance around it before choosing a length.
Why impact sockets
Impact sockets have thicker walls and are made to take the repeated hammering of an impact wrench, which is why they are used in place of chrome hand sockets on power tools. At 1 in. drive the forces are high, so a chrome socket or a worn impact socket can fail. Inspect sockets for cracks and a worn drive opening, and retire any that show damage.
Using them
Match the socket drive to the wrench anvil, and use 1 in. drive impact extensions and adapters when you need reach. Seat the socket fully and keep the wrench square to the fastener. Large sockets are heavy, so the retaining ring or pin on the anvil matters; replace it when it no longer holds the socket firmly. Metric sizes, sets and hex bit drivers are in the sibling categories alongside this one.
Brands we carry here include Grey, Williams, Genius, Sunex, Martin and KT Pro.


















































Follow us on social media