1/2 In. Drive Air Impact Wrenches
The 1/2 in. drive air impact wrench is the workhorse of the auto repair shop. It removes and installs lug nuts, suspension bolts, crank bolts and other high torque fasteners in seconds, using compressed air from the shop system. Auto repair technicians, tire shops, fleet garages and industrial maintenance crews use them every day, and many home mechanics with a good compressor use them too.
How an impact wrench works
Instead of turning steadily, an impact wrench uses an internal hammer that strikes the output shaft many times a second. Those short, sharp blows break loose tight or rusted fasteners with little kickback to your wrist. The tool has a forward and reverse control and usually a power regulator so you can limit output when running fasteners on.
What to look at when choosing
Size and weight: compact and stubby models fit tight spots and reduce fatigue, while full-size tools give more power for heavy rusted hardware. Anvil type: a friction ring anvil lets you change sockets quickly, and a pin and detent anvil holds sockets more securely. Handle and exhaust: pistol grips are the most common; look at where the exhaust points and how loud the tool is if you use it all day. Air supply: check the tool air inlet size and make sure your compressor, hose and couplers can supply enough air, since an undersized hose robs power.
Using them well
Use impact sockets, not chrome hand sockets, which are not made for impact loads. Oil the tool through the air inlet as the maker directs, and drain water from the air lines. Run wheel nuts on and then finish them with a torque wrench or a torque stick, because an impact wrench does not set torque. For larger fasteners, see 3/4 In. and 1 In. Drive Air Impact Wrenches; for lighter work, see 3/8 In. Drive.
Brands we carry here include Ingersoll Rand, Chicago Pneumatic, Aircat, Genius, Williams and GearWrench.























































Follow us on social media