Drill Bits
Twist drill bits cut round holes in metal, plastic and wood when used in a drill motor or drill press. This category holds bits for metal work in fractional sizes, in jobber length for general drilling and stubby length for tight spots and better control, along with drill bit sets in index cases that keep sizes in order. Auto repair technicians, body shops, fabricators, industrial maintenance crews and DIY users all go through them.
Jobber or stubby
Jobber length is the standard general purpose length, long enough to drill through most brackets and panels while staying reasonably stiff. Stubby bits are shorter, which makes them stiffer, less likely to wander or break, and easier to fit in a right angle drill or between parts. Many bits use a 135 degree split point, which starts on a flat surface without a center punch mark and cuts with less pushing force.
Sizes and sets
Fractional sizes, such as 13/64 in. and 21/64 in., run in small steps, and many shops keep a full index so the right size for a tap or a clearance hole is always on hand. Index sets, such as pilot point sets for metal, hold each size in a labeled slot so a missing bit is easy to spot. Single bits replace the sizes that break or dull first.
Using them
Run smaller bits faster and larger bits slower, use cutting oil in steel, and let the bit cut rather than forcing it. Back out often to clear chips in deep holes, and drill a small pilot hole first for large sizes. Auto repair technicians use them to drill out broken bolts and rivets, and body shops drill holes for panels, rivets and trim fasteners.
Brands include KnKut, DeWALT, Hanson, Makita and Tru Cut. Grinding wheels, burrs and cutoff wheels are in the other Abrasives and Grinding categories.



















































Follow us on social media