Hose Clamp Pliers and Tools
Hose clamp tools remove, open and install the clamps that hold coolant, heater, fuel and vacuum hoses on their fittings. This category covers hose clamp pliers for spring clamps, pliers for click clamps and band clamps, clamp lifters, and kits of clamps and plugs used during hose service. Auto repair technicians, fleet shops and DIY mechanics reach for them during radiator, water pump, thermostat, heater core and fuel line work, where the right tool saves time and avoids damaging hoses, clamps and fittings.
Matching the tool to the clamp
Spring clamps, the wire or flat band rings used on many cooling hoses, are squeezed open at their tabs. Standard hose clamp pliers have grooved or swivel jaws that hold the tabs, and locking versions hold the clamp open while the hose is worked off. Long-reach and cable-operated pliers handle clamps buried behind engine parts, where the handle sits in open space and a cable or long shaft carries the squeeze to the jaws. Click clamps and other ear-style band clamps need pliers with jaws shaped to close or release their locking tab. Clamp lifters and picks help pry a clamp tab up so pliers can catch it.
Working on hoses
Before removing a clamp, note where it sits on the hose so the new or reused clamp goes back over the fitting bead in the same place. Squeeze spring clamps only far enough to move them, and slide them back along the hose instead of stretching them. A hose that is stuck to its fitting is usually freed with a hose tool, not by pulling on the clamp. Clamp and plug kits let a technician cap off lines while a part is out.
Brands we carry here include S.U.R.&R., Lisle, OTC, Genius, CTA and Auveco. Related tools live in Automotive Hose Tools, Hose Cutters- Pinchoff and Automotive Radiator Tools.






























































Follow us on social media