Fuel Tank Tools
Fuel tank tools help technicians get into a fuel tank safely to service the pump, sending unit and seals. This category includes lock ring and tank lid wrenches for specific makes, fuel pump removal tools, fuel cap adapter sets for testing caps, handling adapters for lowering tanks with a power train lift, and tank sealing and repair kits.
Getting into the tank
Most in-tank fuel pumps and sending units are held by a large lock ring or threaded lid. A lock ring wrench engages the tabs or slots evenly, so the ring turns without bending or cracking the tank flange, which is easy to do with a hammer and punch. Many tanks have to be lowered first, and a handling adapter on a power train lift holds the tank steady on the way down. Cap adapter sets connect a fuel cap to a tester so it can be checked for a proper seal.
Working safely around fuel
Relieve fuel system pressure before opening lines, work in a ventilated area away from sparks and flames, and drain or lower the fuel level before removing a pump. Replace the tank seal when the pump comes out. Sealing kits clean and coat the inside of an old tank during restoration.
Auto repair shops, fuel system and emissions technicians and restoration shops use these tools when replacing an in-tank fuel pump, fixing a leaking seal or restoring an old tank. Brands here include CTA, OTC, Waekon, Milton, POR 15 and Kent-Moore. Line disconnect tools are in the Fuel Line Disconnect Tools category.

















































Follow us on social media