Bearing Splitters
A bearing splitter, also called a bearing separator, is a two-piece clamp with thin, wedge-shaped edges that close behind a bearing, gear or pulley where puller jaws cannot get a grip. Once the splitter is tightened in place, a puller or press attaches to it to push or pull the part off its shaft. This category includes bearing splitters in several spread ranges, from small sizes such as 1/8 to 2 in. up to larger splitters around 1/2 to 5-3/4 in., plus splitter sets.
How to use a bearing splitter
Slide the two halves behind the part and tighten the bolts evenly so the wedge edges work their way in behind it. Then attach a two-jaw puller or set the splitter on a hydraulic press and apply force to the shaft, not the bearing. Keep the splitter square and tighten both sides in turn, so the part comes off straight and the shaft is not scored.
What to look at when choosing
Pick a splitter whose spread range covers the shaft and part diameter with room to spare, and check that it will fit the puller or press you already have. A set with several sizes covers more jobs than a single splitter.
They are used by auto repair technicians, transmission and differential shops, fleet and diesel shops and industrial maintenance crews. Bearing drivers, bearing packers and steering wheel pullers are in the other Tire Tools, Wheels and Suspension categories. Brands here include OTC, Genius, Cal-Van, Steck and Sunex.















































Follow us on social media