Brake Bleeders
Air in a hydraulic brake or clutch line compresses, which leaves a soft, low pedal. Brake bleeders remove that air and are also used to flush old brake fluid out of the system. This category includes manual bleeder kits with a catch bottle and hose, hand and air powered vacuum bleeders, pressure bleeders that push fluid through from the master cylinder, and master cylinder adapter caps for European and domestic vehicles. Auto repair technicians, brake and alignment shops, fleet garages and DIY users bleed brakes after replacing calipers, wheel cylinders, hoses, lines or master cylinders.
Choosing the right type
A manual kit relies on a helper pumping the pedal while the bleeder screw is opened and closed, and the bottle catches the fluid and keeps air from being drawn back. Vacuum bleeders pull fluid and air out at the bleeder screw, so one person can do the job. Pressure bleeders push fluid from the reservoir through the system under light pressure, which is quick for full flushes and suits shops doing many brake jobs. Adapter caps seal the bleeder to the master cylinder reservoir, and the right cap depends on the reservoir style, so check the vehicle application.
Using them
Follow the bleeding sequence in the service information, as many systems start at the wheel farthest from the master cylinder, and some ABS units need a scan tool procedure. Keep the reservoir from running low, use the brake fluid type stated on the cap, and keep fluid off paint. Tighten bleeder screws gently and recheck pedal feel before road testing.
Related categories
General Brake Service Tools, Brake Caliper Tools, Brake Line and Tubing and Brake Fluid Testers are in the sibling categories under Brake System.
Brands we carry
Brake bleeders here come from CTA, CEJN, Mityvac, Branick, Car Certified Tools and Phoenix Systems, with more from OTC and S.U.R.&R.





























































Follow us on social media