1 In. Drive Metric Impact Sockets
One inch drive impact wrenches are the standard tool for wheel nuts on heavy trucks and buses and for large fasteners on construction, farm and industrial equipment. This category holds single 1 in. drive impact sockets in large millimeter sizes, so you can replace a worn or lost socket or add exactly the size your equipment uses. Truck and bus fleet shops, tire shops that service commercial vehicles, heavy equipment mechanics and industrial maintenance crews use them.
Why impact sockets
Impact sockets are made to stand up to the repeated blows of an impact wrench. They are usually thicker in the wall than chrome hand sockets and have a black finish instead of plating. Most have a cross hole for a retaining pin and ring that locks the socket to the anvil so a heavy socket does not fall off the tool. Chrome hand sockets should not be used on impact wrenches.
Choosing the right socket
Size: metric sockets are listed by the hex size in millimeters. Many newer trucks, European and Asian equipment and metric wheel hardware need these sizes. 6 point or 12 point: 6 point sockets grip the flats of the nut and resist rounding under impact, which makes them the usual choice. 12 point sockets fit more positions and suit 12 point fasteners. Length: standard length sockets suit most nuts; deep sockets reach nuts on long studs and wheel studs. Some sockets have a thin wall to fit into wheel recesses.
Using them well
Fit the retaining pin and ring each time, inspect sockets for cracks or worn openings, and finish wheel nuts to the vehicle specification with a torque wrench. For SAE sizes and complete sets, see the other categories under 1 In Drive Impact Sockets.
Brands we carry here include Genius, Grey Pneumatic, KT Pro, Williams and Sunex.









































.jpeg)
Follow us on social media