1-1/2 In Drive Metric Impact Sockets
The 1-1/2 in. drive is made for the biggest fasteners in a shop: track and undercarriage bolts, large wheel and hub nuts, mounting bolts on mining and construction machines, rail and marine equipment and industrial presses. This category holds individual metric impact sockets for that drive in standard, deep and jumbo lengths, in large sizes such as 110mm. Heavy equipment and mining shops, field service trucks, rail and port maintenance and large fleet shops are the main users.
Why impact sockets
Large impact wrenches deliver hard, repeated blows. Impact sockets are made to take that torque and absorb the shock, where a hand socket of the same size could crack. They are normally finished in black so they are easy to tell from chrome hand sockets, and they should be paired with an impact wrench, impact extensions and impact adapters rather than hand tools.
Choosing a socket
Match the size and the drive first, then the length. Standard sockets keep the tool close to the work for the most strength and the least wobble. Deep sockets reach nuts on long studs and recessed bolts. Jumbo sizes cover the largest nuts. Check the product name for the overall length, since sockets this size vary a lot and clearance around large machines is often tight. A retaining pin and ring holds the socket on the anvil so it cannot walk off under load; replace them when they wear. Inspect sockets for cracks, worn corners or a damaged drive square before each use, because a failing socket at this size can cause serious damage or injury. Store them on a rail or in a rack so sizes are easy to find.
Related categories
Inch sizes in this drive are in SAE Individual, and hex drivers are in Hex Bit Sockets under 1-1/2 In Drive.
Brands we carry here include Genius, Grey Pneumatic, KT Pro and Koken.












Follow us on social media