Riveter Parts
Riveter parts are the replacement and changeover parts for blind rivet tools and rivet nut tools. This category includes nosepieces sized to each rivet diameter, mandrels for rivet nut tools, nose assemblies for heavier pulling tools, and other wear and service parts. Body shops, truck and trailer repair shops, sheet metal and HVAC installers, aviation workers and industrial maintenance crews keep them on hand so a tool is not out of service for one missing piece.
How the parts work
A blind riveter pulls the rivet stem through the nosepiece until the rivet sets and the stem snaps. The nosepiece must match the rivet diameter, so changing it lets one tool set several sizes. Inside the tool, jaws grip the stem and wear with use; worn jaws slip and leave rivets loose or half set. On a rivet nut tool, the mandrel threads into the nut and draws it up against the back of the panel, so the mandrel size must match the nut thread.
Ordering the right part
Riveter parts are usually made for particular tool models, so note the brand and model of your riveter first. Then match the nosepiece or mandrel to the rivet or rivet nut you set, such as a 3/32 in. or 3/16 in. nosepiece for those rivet sizes. Keep spare nosepieces and mandrels in your common sizes, since they are small and easy to lose, and replace a nosepiece whose hole has worn oval.
Where they are used
Riveter parts keep hand, air and cordless rivet tools working in body repair, trailer and truck body work, ductwork and general fabrication. The riveters themselves, rivets and rivet nuts are in the other Riveters - Rivets categories.
Brands we carry here include Marson, Huck, Sunex, Astro Pneumatic and S&G Tool Aid.











































.jpeg)

Follow us on social media