Transmission Valve Body Air Test Plates
An air test plate bolts to an automatic transmission case or valve body in place of a mating part. Each port on the plate leads to a hydraulic passage, so compressed air can be applied to one circuit at a time to check that clutches and servos apply and that seals and passages hold air.
Each plate is made for one transmission family, such as the Ford A4LD, AXODE and AX4N and the GM 440-T4 and 4T60, so match the unit before ordering. Use low, regulated air and listen for the clutch or servo to apply; a hiss or no response points to a leak to chase before the unit goes back in the vehicle. Transmission rebuilders and drivetrain specialists use these plates during teardown and after assembly. Pressure gauges are in Pressure Gauges, and holding fixtures are in Holding Fixtures and Support.

























Follow us on social media