Automotive A/C Oil and Leak Detection Dye
This category holds the oils and dyes that go into vehicle air conditioning systems during service, along with the injectors and kits used to add them. Auto repair shops, A/C specialists, fleet shops and dealer service departments use them when recharging a system, replacing a compressor or other part, and hunting down slow refrigerant leaks.
Refrigerant oil
Compressor oil travels through the system with the refrigerant and keeps the compressor lubricated. Oil leaves the system with a leak and with replaced parts, so it has to be topped up during repairs. The correct oil type and amount depend on the compressor and the refrigerant, so follow the vehicle or compressor maker's specification rather than guessing.
UV leak detection dye
Fluorescent dye is added to the system and circulates with the refrigerant and oil. Where refrigerant escapes, a trace of dye escapes with it and glows under a UV or blue light lamp, pointing straight to the leak. Dye is sold in cartridges and single dose syringes, some combined with oil, in versions for R-134a and R-1234yf systems.
Injectors and kits
Dye and oil injectors connect to the low side service port and push a measured charge into the system. Products here include syringe dyes with hoses, cartridge injectors, refillable injection tools and complete dye injection kits. Make sure the injector fittings match the refrigerant, since R-134a and R-1234yf systems use different service couplers. UV lamps, electronic leak detectors and other leak finding tools are in the A/C Leak Detectors category, and oil injection tools also appear under A/C Oil Injectors. Add only the amount of dye the dye maker calls for, since extra dye does not make leaks easier to find. Wipe service ports clean after injecting so stray dye does not give a false reading later.
Brands here include Tracer Products, FJC, UView, Mastercool, Robinair and Cliplight.















































Follow us on social media