A/C Vacuum Pumps and Evacuation Supplies
Before an air conditioning system is charged with refrigerant, it has to be pulled into a deep vacuum. The vacuum pump removes air and boils off moisture left in the system after it was opened for repair. Air and moisture left behind reduce cooling and can react with the oil and refrigerant. This category holds A/C vacuum pumps for automotive and HVAC work, along with hand vacuum pumps, vacuum gauges, pump oil, switches and replacement parts. Auto repair shops, A/C specialists, fleet shops and HVAC technicians are the main users.
Choosing a pump
Electric pumps are rated in CFM, the volume of air they move. A larger CFM pump pulls down a big system faster, while a smaller pump is lighter to carry from bay to bay. Two stage pumps reach a deeper final vacuum than single stage pumps. Shops servicing newer vehicles should check whether a pump is listed for R-1234yf; some pumps here use sparkless motors made for that refrigerant. Hand operated vacuum pumps serve smaller jobs and testing.
Gauges, oil and upkeep
A vacuum or micron gauge shows how deep the vacuum really is and whether it holds once the pump is shut off. A rising reading points to a leak or moisture still boiling off. Pump oil absorbs moisture during use, so change it often and keep the pump capped when stored. Replacement switches, fittings and parts keep an older pump in service.
Using them
Recover any refrigerant first with recovery equipment, connect the pump through the manifold gauges or service machine, and run it until the target vacuum is reached. Close the valves and watch the gauge for a hold test before charging. Related tools are in A/C Manifold Gauges, A/C Recycling And Recharging and A/C Leak Detectors.
Brands here include Mastercool, Mityvac, Robinair, CPS, FJC and Uview.






















































Follow us on social media