Impact Socket Bit Drivers
An impact socket bit driver combines a square drive and a fixed bit in one piece, made to take the hammering of an air or cordless impact wrench. Instead of gripping the outside of a nut, the bit fits into the head of the fastener. This category holds SAE and metric hex drivers, internal Torx drivers and triple square drivers in 1/2 in., 3/4 in. and 1 in. square drive, in standard and longer lengths. Auto repair technicians, truck and fleet shops and industrial maintenance crews use them on axle, CV joint, suspension and driveline bolts that are too tight for a hand bit socket.
How they differ from hand bit sockets
A hand bit socket often holds a separate bit in a press-fit or clip holder, which can loosen or crack under impact. Impact bit drivers are built for the repeated blows of an impact tool, so they are the better fit when a fastener needs real force to break loose or run down. Final tightening to a spec still belongs to a torque wrench.
Choosing the right driver
Match the bit profile to the fastener first: hex for socket head cap screws, Torx for six-lobe heads and triple square (XZN) for the twelve-point recess heads found on many European vehicles. Then pick the drive size to suit the impact wrench, and a longer driver when the bolt sits deep in a knuckle or hub. A bit seated to full depth is less likely to strip the head.
Brands we carry here include Apex, Grey Pneumatic, VIM, Sunex, Genius and KT Pro. Standard impact sockets are in the drive size categories such as 1/2 In Drive Impact Sockets, and adapters are in Impact Adaptors & Extensions.





















































Follow us on social media