3/8 In Drive Micrometer Torque Wrenches
A micrometer torque wrench is set by turning the handle to a value on its scale. When the fastener reaches that torque, the wrench gives a click you can feel and hear, telling you to stop pulling. The 3/8 in. drive size covers the middle range used on many engine, brake, suspension, accessory and equipment fasteners, where a 1/4 in. drive wrench is too light and a 1/2 in. drive wrench is bulky.
Head styles and scales
This category includes standard fixed head click wrenches, flex head models that angle to clear obstructions, and ratchet head versions for quick run-down and use in either direction. Many are dual scale, reading in both ft-lb and Nm, so you can work straight from a service manual in either unit. Check that the spec you work with falls in the middle part of the wrench range rather than at its very ends.
Using and caring for them
Pull smoothly on the handle grip and stop at the click; do not keep pulling past it. A click wrench is a measuring tool, not a breaker bar, so loosen fasteners with a ratchet instead. Store it at its lowest setting and have it checked on a tester from time to time.
Brands here include CDI, GearWrench, Genius, Milwaukee, Precision Instruments and Williams. Other drive sizes, dial, split beam and electronic torque wrenches and torque testers are in the sibling Torque Wrenches categories.











































Follow us on social media