Vinyl Pinstriping and Auto Striping Tape
Vinyl striping tape adds pinstripes, accent lines and graphics to cars, trucks, motorcycles, boats, trailers and RVs without paint. This category is mostly rolls of self-adhesive vinyl striping in solid and metallic colors and a wide range of widths, from single fine pinstripes to multi-stripe tapes that lay down two or more parallel lines in one pass. Body shops, detail shops, dealership reconditioning departments, sign shops and hobbyists use it to restore factory stripes, cover repair lines and add custom looks.
Choosing a stripe
Product names give the width, the color and the roll length, often written as width x length, so you can match an existing stripe or work out how much a job needs. Measure the old stripe and the run along each side of the vehicle before ordering, and allow extra for trimming at panel gaps. Multi-stripe tapes keep the spacing between lines even, which is hard to do by hand with separate rolls. Order enough of one color for the whole vehicle at once, so both sides match.
Applying striping
Wash the panel and wipe it with a wax and grease remover so the adhesive bonds to clean paint, and let fresh paint cure fully before striping. Mark the line with a light guide or a strip of masking tape, lay the stripe in short lengths while keeping light, even tension, and press it down firmly with a squeegee or your thumb. Cut the ends at panel gaps with a sharp blade and wrap or trim them so they do not lift. Work in moderate temperatures; adhesive grabs poorly on a cold panel and the vinyl stretches too easily on a hot one. To remove old stripes, gentle heat and a plastic blade or an eraser wheel lifts the vinyl, and adhesive remover cleans up what is left.
Brands we carry here include Sharpline, ProtektoTrim, 3M and Prostripe.
























Follow us on social media