Thread Repair
Stripped and damaged threads turn a simple bolt into a stuck job. Thread repair tools let you restore a hole or a bolt to full use instead of replacing the part, which matters for engine blocks, cylinder heads, transmission cases, aluminum housings and frames. This category holds thread repair kits, coil and solid thread inserts in UNC, UNF and metric sizes, insert installation tools and rethreading tools. Auto repair technicians, engine builders, diesel and fleet shops, machine shops and industrial maintenance crews all rely on them.
Choosing the right repair
Thread insert kits are the standard fix for a stripped hole. You drill out the damaged threads, cut new threads with the kit tap, then install an insert that gives you the original thread size again. Coil inserts are wound from wire and are installed with a driving tool; the tang is then broken off. Solid inserts are a one-piece threaded sleeve and suit places that see repeated assembly. Kits come in a single thread size with the drill, tap, driver and inserts, or as master kits that cover a range of sizes. Loose inserts let you restock a kit. Rethreading tools, such as thread files, chasers and restorers, clean up damaged threads on bolts, studs and holes when the threads are bruised but not gone.
Getting a good repair
Identify the thread size and pitch with a gauge before you start, and keep the drill and tap square to the surface. Use cutting oil, back the tap out often to clear chips, and blow out the hole before fitting the insert. In aluminum parts, a quality insert can leave the threads stronger than they were.
Related tools
See the Heli-Coil and Taps and Dies categories next to this one, and Extractors and Stud Removers for broken fasteners.
Brands we carry here include NES, CTA, Auveco, Recoil, Gedore and Heli-Coil.
























































Follow us on social media