Diesel Compression Testers
A diesel compression tester measures the pressure each cylinder builds as the engine cranks. Low or uneven readings point to worn rings, leaking valves or a failed head gasket. Diesel engines need a high pressure gauge and an adapter that seals in the injector bore or glow plug hole, so this category holds complete test kits plus many engine specific adapters for Ford, GM, Navistar, Mack and other diesel engines.
How a compression test is done
The injector or glow plug comes out of each cylinder in turn and the matching adapter threads or clamps into its place. With the fuel disabled so the engine cannot start, the engine is cranked a set number of times while the gauge records the highest reading. Comparing the cylinders matters as much as the numbers themselves: one low cylinder points to a problem in that cylinder, while all low can point to wear or low cranking speed.
Choosing a kit and adapters
Start with the engines you see most and check that the kit includes, or can take, the adapters for them. A gauge made for diesel pressure is a must, since a gasoline gauge will not cover the range.
Diesel and fleet shops, truck dealers and heavy equipment mechanics use these testers to check engine condition before an overhaul, after a hard start, or when buying a used truck. Brands here include Lang, S&G Tool Aid, OTC, Mityvac, CTA and Baum. Injector testers are in the Diesel Injector Test Tools category.














































Follow us on social media