Hub and Hubcap Tools
Wheel hubs are often rusted tight to the knuckle or axle, and hubcaps, wheel covers and grease caps need the right tool to come off without damage. This category covers hub pullers and slide hammer hub removers, hub knock tools, hubcap and wheel cover removal tools, dust cap pliers and installers, and vehicle-specific hub tools and adapters. Auto repair technicians, brake and suspension shops, tire shops and fleet and diesel shops all use them.
Hub pullers and knockers
A hub puller bolts to the wheel studs and either pushes against the axle or pulls with a slide hammer to draw a stuck hub out of the knuckle. Hub knock tools bolt or thread onto the hub so a slide hammer or hammer blow can break it free. Adapters let one puller fit several stud patterns. These are the tools for wheel bearing and hub replacement on cars, light trucks and some heavier vehicles.
Hubcap, wheel cover and dust cap tools
Hubcap and wheel cover tools pry covers off evenly without bending them or scratching the wheel. Dust cap pliers grip a grease cap so it can be worked off without crushing it, and dust cap installers drive a new cap on straight. Some tools are made for particular vehicles, such as certain GM and Corvette models, so check the application before ordering.
Using them
Soak rusted hubs with penetrating oil, protect the axle threads and nearby sensors, and pull in steady steps instead of hammering on the hub itself. Clean and inspect the knuckle bore before installing the new hub, and tighten the axle nut and hub bolts to the vehicle spec.
Brands include OTC, Specialty Products, Ken-Tool, Gedore, CTA and S&G Tool Aid. Bearing drivers, bearing splitters and axle nut sockets have their own categories in Tire Tools, Wheels and Suspension.






















































Follow us on social media