Headlight Aimers and Headlamp Service
Headlights that point too high glare into oncoming traffic, and lamps that point too low or to the side shorten what the driver can see. Headlight aimers check where each lamp points so it can be adjusted to the vehicle maker's setting. This category holds headlamp aiming equipment along with the adapters, dust covers, plugs and parts that keep aimers in service, plus light intensity meters and headlight lens restoration kits. Inspection stations, dealerships, collision repair shops and alignment shops use them after lamp replacement, front end repair or a failed inspection.
How aiming works
An aimer is set in front of the vehicle or attached to the lamp and shows how far the beam sits from where it should be, so the adjusters can be turned until it lines up. For a true reading the vehicle should sit on a level floor at normal ride height with tires at the correct pressure. Adapters let one aimer fit different headlamp designs.
Restoring clouded lenses
A yellowed or hazy lens scatters light and can throw off a beam check, so cleaning and restoring the lens before aiming gives a better result.
Brands here include Symtech, American Aimers and Auveco.









































Follow us on social media