Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Electric Power Tools > Grinders > 4-1/2" Small Angle Grinder with One-Touch™ Gua

4-1/2" Small Angle Grinder with One-Touch™ Guard

4-1/2\" Small Angle Grinder with One-Touch™ Guard

FEATURES

  • 7 amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection
  • One-Touch™ guard eliminates the need for a tool to adjust the guard location.
  • Hex wrench replaces spanner wrench - hex wrench is found in most tool boxes if lost
  • Low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces
  • Quick-Change™ wheel release allows tool-free wheel removal without the need for a wrench
  • 2-position removable side handle provides increased comfort and control
  • Slim, ergonomic body design provides increased comfort in extended use applications
  • 5/8"-11 spindle thread accepts a wide range of 4-1/2" accessories
  • Replaces D28110
  • This product runs off of AC/DC power

Specifications

  • Amps 7.0 Amps
  • Dust Ejection System™ No
  • Max Watts Out 850 W
  • No Load Speed 12,000 rpm
  • Power Tool Type Corded
  • Spindle Thread 5/8"-11
  • Switch Type Slide
  • Tool Length 10-5/8" in
  • Tool-Free Flange System Yes
  • Wheel Diameter 4-1/2"

Includes

  • 2-position side handle
  • Depressed center wheel
  • One-Touch™ Guard
  • Hex Wrench
  • Manufactured by: DeWALT
  • Toolsource #: 287038
  • Manufacturers Part #: DWE4011
  • Also Known As: DWE4011

Only 1 left in stock - order soon

$74.10

Customers Also Purchased:

  • 9" Linemen Fish Tape Pliers
    9" Linemen Fish Tape Pliers
    Manufacturers Part #: 369CRFT
    Your Price: $31.80
    9" Linemen Fish Tape Pliers  369CRFT ? High leverage ? Round nose ? Crimps insulated and non-insulated terminals ? 12 AWG wire looper ? Fishtape puller ? Cuts ACSR ? Laser heat-treated cutting edges last longer ? Only CHANNELLOCK® uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life ? Useful crushing area ? CHANNELLOCK® uses high-carbon C1080 steel for superior performance on the job and e...
  • Master SAE & Metric Rethreader Kit - 40 Piece
    Master SAE & Metric Rethreader Kit - 40 Piece
    Manufacturers Part #: 972
    Your Price: $69.48
    40 Pc SAE & Metric Thread Rethreader Kit Includes: 7 National Coarse Dies, sizes- 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12, 5/8"-117 National Fine Dies, size- 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-186 Metric Dies, sizes- M6x1, M8x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.756 National Coarse Taps, sizes- 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-126 National Fine Taps, size- 1/4"-28, 5/16"-24, 7/16"...
  • 3/8" Drive Super Duty Air Ratchet
    3/8" Drive Super Duty Air Ratchet
    Manufacturers Part #: SX113
    Your Price: $32.56
    3/8" Drive Super Duty Air Ratchet  SX113 45 ft. lbs. torque Provides both performance and value Ball detent socket retainer 150 rpm for quick run down Both ball and needle bearing construction for smooth operation Also available: 3/8" Head kit - part # RSRHK100C Free Speed (RPM) @ 90PSI 150 Torque (ft-lbs) @ 90PSI 45 Square Drive (In.) 3/8 Air Inlet (NPT) 1/4 Min. Hose Size (I.D.) 3/8 Recommended Air Pressure (PSI) 90 Average Air Consu...
  • 6 Inch Long Nose Locking Pliers VGP6LN
    6 Inch Long Nose Locking Pliers VGP6LN
    Manufacturers Part #: 6LN
    Jaw adjustment 0 - 2 1/4"/0 - 57mm.Wire cutter. The world`s most versatile tool - used for turning, cutting, tightening, clamping & twisting.Meets federal specifications GGG-W-00649. Adjusting screw gives exacting pressure - turn adjusting screw to fit work and squeeze handle with one hand to lock on with tremendous pressure.Stays adjusted for repetitive use. Guarded release helps keep work safe and fast - guarded release trigger quickly unlocks...
  • 42pc. 3/8" Drive Impact Socket Master Set
    42pc. 3/8" Drive Impact Socket Master Set
    Manufacturers Part #: 3342
    Your Price: $95.72
    Blow molded storage case fits into most tool boxes and service carts All Sunex Tools impact sockets are forged from CR-MO alloy steel and heat treated to precise specifications for unmatched quality and durability. Sockets are laser etched and roll stamped for lasting size recognition. Built in carry handle provides convenient transport Set Includes: 8 Std Length SAE: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4" 8 Deep Length SAE: 5/16, 3/8, ...
  • Cable Cutters
    Cable Cutters
    Manufacturers Part #: KTI52009
    Your Price: $25.11
    Features and Benefits Heavy duty For use in cutting copper and aluminum 9-1/4" Length Jaws open to approximately 2" Do not use on steel wire or ACSR cable ...

Customers Also Shopped For:

  • 4-1/2" (115mm) Small Angle Grinder
    4-1/2" (115mm) Small Angle Grinder
    Manufacturers Part #: D28110
    Product Features 7.0 Amp AC/DC, 11,000 rpm motor designed for faster material removal and higher overload protection Quick-Change™ Wheel Release allows tool free wheel removal without need for a wrench Low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces Oversized, protected spindle lock button provides easier and quicker wheel changes 2-position removable side handle provides increased comfort and co...

Current Reviews: 0