What is a brake lining thickness gauge and why is it important?

A brake lining thickness gauge is a tool used to measure the remaining thickness of brake pads or shoes. These gauges, like the GearWrench Brake Lining Thickness Gauge, often use a color-coded system to quickly identify whether the lining is within safe operating limits. Regularly checking brake lining thickness is crucial for preventative maintenance, helping to avoid unsafe braking conditions and potential damage to rotors or drums. Using a gauge provides a more accurate and consistent reading than visual inspection alone, ensuring informed decisions about brake service.

What is a disc brake pad spreader and how does it simplify brake jobs?

A disc brake pad spreader is a tool designed to compress the brake caliper piston, creating enough space to easily install new brake pads. When replacing worn pads, the caliper piston needs to be pushed back into its bore to accommodate the increased thickness of the new pads. Tools like the Lisle Disc Brake Pad Spreader make this process much easier and faster than using makeshift methods. Always ensure the brake fluid reservoir is open when compressing the piston to prevent pressure buildup.

What is a brake slack adjuster tool and when is it used?

A brake slack adjuster tool is specifically designed for adjusting the slack in S-cam brake systems, commonly found on heavy-duty vehicles like trucks and trailers. These tools allow technicians to quickly and accurately adjust the brakes to ensure proper function and prevent excessive travel. Using a tool like the OTC 5052 Brake Slack Check helps maintain optimal braking performance and compliance with safety regulations. Improperly adjusted slack adjusters can lead to reduced braking efficiency and potential safety hazards.

What should I consider when selecting a brake caliper bolt removal tool?

When selecting a brake caliper bolt removal tool, consider the type of fastener you're working with (e.g., Torx, hex, or standard bolts). Access to the bolt is also important; stubby or low-profile tools may be necessary in tight spaces. Ensure the tool is made from high-quality steel to withstand the torque required for stubborn bolts. Some sets include a variety of sizes and styles to accommodate different vehicle makes and models. Always refer to the vehicle's service manual for the correct fastener size and torque specifications.

What are common hand tools needed for general brake service?

General brake service typically requires a variety of hand tools, including wrenches, sockets, screwdrivers, pliers, and a brake spring tool if working on drum brakes. A brake bleeder wrench is essential for bleeding the brake lines after completing service. A torque wrench is crucial for properly tightening bolts and fasteners to the manufacturer's specifications. Also, consider specialized tools like brake pad spreaders or caliper piston compressors for disc brake work. Always consult the vehicle's service manual for specific tool requirements.

What is a brake resetting gauge tool used for?

A brake resetting gauge tool, like the GearWrench 3377 Brake Resetting Gauge Tool, is used to accurately set the brake shoe clearance on drum brake systems after performing maintenance or replacing components. Proper brake shoe clearance is critical for optimal brake performance and to prevent dragging or premature wear. These gauges provide a precise measurement, ensuring the brakes are adjusted to the manufacturer's specifications. This helps maintain consistent braking and prolongs the life of the brake system.

What safety precautions should I take when using brake service tools?

Safety is paramount when working on brake systems. Always wear safety glasses to protect your eyes from debris and brake fluid. Use gloves to avoid skin contact with brake fluid, which can be corrosive. Ensure the vehicle is properly supported on jack stands before working underneath it. When using tools that generate force, such as brake spring tools, follow the manufacturer's instructions carefully to prevent injury. Dispose of used brake fluid properly according to local regulations.

When would I need a specialized brake spring tool like the Eaton Truck Brake Spring Tool LT895?

Specialized brake spring tools, such as the Eaton Truck Brake Spring Tool LT895, are designed for safely removing and installing the heavy-duty springs found in drum brake systems, particularly on trucks and other large vehicles. These springs exert significant force, and attempting to remove or install them without the correct tool can be dangerous. Using a dedicated brake spring tool ensures proper compression and alignment, reducing the risk of injury and damage to the brake components. Always refer to the vehicle's service manual for specific spring removal and installation procedures.

Search

Manufacturers [more]

OTC Tools and Equipment | 3890 | OTC 3890 Brake Fluid Safety Meter - Professional Fluid Tester

Name: OTC 3890 Brake Fluid Safety Meter - Professional Fluid Tester
Brand: OTC Tools and Equipment
SKU: 89742
Price: 593.59 USD
Availability: InStock
Rating: 3 (1 reviews)

larger image

This new Brake Fluid Safety Meter can check a vehicle`s brake fluid in less than a minute.

The tester actually boils a small sample of brake fluid in the reservoir to test for water contamination, which can dangerously hinder a vehicle`s ability to stop.

The tester`s on-screen prompts will lead a technician through testing and the determination of minimum boiling points and minimum recommended levels for various types of brake fluid.

Works on DOT3, DOT4 and DOT51 fluids.

No consumable test strips - buy this tool and test every vehicle that comes into your shop.

Specifications:

Accuracy 212? - 356° - 1% typical, 3% max.
Accuracy above 356° - 3% typical, 5% max
Testing Time - 15 - 60 seconds
Operating Temperature Range - 32? - 122°

OTC 3890 Brake Fluid Safety Meter

Other products
OTC Tools and Equipment Homepage
Model: 89742
Shipping Weight: 2.5lbs
Manufacturers Part #: 3890
Manufactured by: OTC Tools and Equipment
Also Known As: OT3890, OTC-3890, OTC3890

Only 1 left in stock - order soon

$593.59

Earn 1% Back On Every Purchase (Rewards Program)

We are Here To Help (Contact Us)

3 people have this item in their cart!

Write Review

This product was added to our catalog on Friday 16 February, 2007.

Automatic Discount

Special Deal: Purchase the item above and one from below to save!

Old Price:

$135.1100

- $16.21

Your Price:

$118.9

Search

Manufacturers [more]

Categories

OTC Tools and Equipment | 3890 | OTC 3890 Brake Fluid Safety Meter - Professional Fluid Tester

$593.59

Automatic Discount

Special Deal: Purchase the item above and one from below to save!

Customers who bought this product also purchased...

Customers Also Shopped For

Customer Service

Popular Manufacturers

Popular Categories