Permanent Anchorage 5/8" Hole - surewerx

Features and Benefits:

• A complete fall arrest system requires three primary components: approved full body harness, connector and anchorage connector.
• Anchors can be connected to a variety of materials such as steel, wood and concrete. The anchor should be located directly above the worker to prevent swinging. The height of an anchor is a key variable when determining fall clearance. As with all fall protection products, anchors must be inspected by a competent person at a minimum annually.
• All PeakWorks anchors are built with a minimum tensile strength of 5,000 lb.
• All PeakWorks anchors meet or exceed CSA Z259.15 and ANSI Z359.18 standards and OSHA requirements.
• 310-lb (141-kg) capacity for 1 worker (combined weight of person, tools, clothing, etc.). Permanent Anchorage with 5/8" (16mm) Hole.

KnKut Silver & Deming 1/2" Reduced Shank Performance Drills feature a 135 degree split point for fast penetration and accurate starting without the need of a center punch. Made of Hi-Molybdenum tool steel with the body and clearance surface treated for maximum lubricity. Space age Nitro-Carbonized steel withstands higher drilling tempretures while maintaining sharpness. Precision ground point, flutes, body clearance and drill diameter give you the ultimate in accuracy and performance. Recommended for use in work-hardened grades of stainless steel and other hard metal drilling applications. 3 Flats on Shank.