1/4 In 3 Flute Tap Extractor - 6 mm - Walton Tools

6mm (1/4 In) 3 Flute Tap Extractor

Here`s all there is to it... 3 Simple Steps for removing broken taps the easy way

1. Thoroughly remove all chips of the broken tap. Insert the extractor fingers into the flutes of the broken tap, pushing them gently but firmly into position.
2. Push the holder down until it touches the broken tap. Slide the sleeve down until it touches the work. (Both are important.)
3. Apply a tap wrench to the square end of the holder. Twist forward and backward a few times to loosen, then back out the broken tap.
4. For machine screw and hand taps.