6mm (1/4 In) 4 - Flute Finger Replacement

The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
Remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts.
Tap Extractors will fit both NC and NF taps.

Shipping Weight: 0.01lbs
Manufactured by: Walton Tools
Toolsource #: 50733
Manufacturers Part #: 12254
Also Known As: WLT12254, WTN12254

We have 31 in stock

Write Review

$1.96

Frequently bought together:

4 Flute Tap Extractor - 6mm (1/4 In)

Add this item to your cart and save $0.98 when purchased with the product above.
Discount applied at checkout.

# 1 Tap Extractor Set - 6-Pc

Add this item to your cart and save $0.98 when purchased with the product above.
Discount applied at checkout.

Customers Also Purchased:

7mm, 8mm (5/16 In) 4-Flute Extractor Replacement Finger

Manufacturers Part #: 12314
Your Price: $2.18
Extra Finger for 4-Flute Extractor #10314 The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. Remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. Tap Extractors will fit both NC and NF taps. Single Finger only. Walton Tools 12314 5/16" (7mm, 8mm) Replacement Finger ...
Add to Cart Details
9mm, 10mm (3/8 In) 4 - Flute Finger Replacement

Manufacturers Part #: 12374
Your Price: $2.08
The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. Remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. Tap Extractors will fit both NC and NF taps. ...
Add to Cart Details
5mm (3/16 In) 4 - Flute Finger Replacement

Manufacturers Part #: 12104
Your Price: $1.60
The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. Remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. Tap Extractors will fit both NC and NF taps. ...
Add to Cart Details
4 Flute Tap Extractor - 6mm (1/4 In)

Manufacturers Part #: 10254
Your Price: $17.98
Here`s all there is to it... 3 Simple Steps for removing broken taps the easy wayThoroughly remove all chips of the broken tap. Insert the extractor fingers into the flutes of the broken tap, pushing them gently but firmly into position.Push the holder down until it touches the broken tap. Slide the sleeve down until it touches the work. (Both are important.)Apply a tap wrench to the square end of the holder. Twist forward and backward a few time...
Add to Cart Details
4 - Flute Tap Extractor - 5/16 In (7mm, 8mm)

Manufacturers Part #: 10314
Your Price: $17.74
Tap Extractor Size: 5/16" (7mm, 8mm)Remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. Tap Extractors will fit both NC and NF taps. Image depicts Tap Extractor Parts: Holder, Collar, Sleeve and Fingers. (For replacement fingers, minimum package quantity is 12.) Walton 10314 Complete Tap Extractor - 4-Flute ...
Add to Cart Details
# 1 Tap Extractor Set - 6-Pc

Manufacturers Part #: 18001
Your Price: $109.71
Includes: 3/16", 1/4", 5/16", 3/8", 7/16", & 1/2" 4 - Flute Style.Packed in 6 - compartment plastic case.The hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely. Remove broken taps without drilling, lasers, damaged threads, scrapped parts or repair inserts. Tap Extractors will fit both NC and NF taps. Walton 18001 6-Pc #1 Tap Extractor Set ...
Add to Cart Details

Customers Also Shopped For:

Heavy Duty Wheel Balancer

Manufacturers Part #: 6450-3D
Your Price: $12,303.85
...
Add to Cart Details
1/2 In Dr Metric Hex Driver Set 6 In Length - 13-Pc

Manufacturers Part #: 1363MH
Your Price: $220.41
Metric Hex Driver Set contains one piece impact hex drivers, 6'' length in sizes 6mm to 19mm.High quality chro-moly alloy steel.GP High Torque Drive Socket design for increased strength with reduced chance of fastener rounding.Set weight: 6.7 lbs. Lifetime Warranty. Includes the following Sizes - Item Numbers: 6mm - 29066M7mm - 29076M8mm - 29086M10mm - 29106M11mm - 29116M12mm - 29126M13mm - 29136M14mm - 29146M15mm - 29156M16mm - 29166M17mm - 29...
Add to Cart Details
AccuTorq Torq Bar - 17mm 55 ft-lbs- Green

Manufacturers Part #: 10-0304
Your Price: $25.26
Solid one piece construction of AccuTorq® automotive and commercial truck sockets eliminate the wide torque variances unavoidable with socket extensions and adapters.Patented AccuTorq® "strobe marks" stop turning at precisely the correct torque EVERY time. There is no "guess" work and no recalibration.AccuTorq® provides deep-well sockets for those special applications where regular socket depth is just not enough to get the job do...
Add to Cart Details
HCS Taper Pipe Tap - 1/4In 18 NPT

Manufacturers Part #: 1903
Your Price: $7.02
1/4"-18 NPT high carbon steel pipe tap.Rugged high carbon steel construction for the most demanding jobs.Polished flute aids in chip removal to produce a cleaner thread.For cutting internal threads in pipes.Nominal size of the tap is that of the pipe fitting being tapped.Ideal for pipe fittings.Tapered at a rate of 3/4" per foot.8 to 10 threads chamfered for easy starting.Made in USA. Irwin Hanson 1903 High Carbon Steel Fractional Taper Pipe Tap...
Add to Cart Details
AccuTorq Torq Bar - 21mm 80 ft-lbs- Lt Brown

Manufacturers Part #: 10-0310
Your Price: $30.98
Solid one piece construction of AccuTorq automotive and commercial truck sockets eliminate the wide torque variances unavoidable with socket extensions and adapters. Patented AccuTorq "strobe marks" stop turning at precisely the correct torque EVERY time. There is no "guess" work and no recalibration. AccuTorq provides deep-well sockets for those special applications where regular socket depth is just not enough to get the job done. LIFET...
Add to Cart Details
Serrated Shrinking Dolly

Manufacturers Part #: 1058S
Your Price: $43.48
Shaped like a toe dolly but has one face covered with raised serrations for shrinking metal streched by dents.Weight 3.4 lbs. Martin Sprocket & Gear 1058S Serrated Shrinking Dolly...
Add to Cart Details