3/4 In Dr 12 Pt Lower Idler Gear Socket for International - 20mm

Necessary for the proper removal and installation of the lower idler gear assembly.
Applications: DT / DTA 360 / 466, DT 466 / 530 (PLN), DT 466/ 530E, DT 466/ 570, HT 570

OTC ZTSE4383 3/4" Drive 12 Point 20mm Lower Idler Gear Socket

Shipping Weight: 1lbs
Manufactured by: OTC Tools and Equipment
Toolsource #: 110347
Manufacturers Part #: ZTSE4383
Also Known As: OTC-ZTSE4383, OTZTSE4383

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

Write Review

$76.28

Related Products

Oil Seal Installer Rear

Manufacturers Part #: ZTSE4318
Your Price: $328.76Includes Free Shipping
This item may not be in stock; please email service@toolsource.com for lead time. OTC ZTSE4318 Rear Oil Seal Installer ...
Add to Cart Details
Crank Front Oil Seal Installer

Manufacturers Part #: ZTSE3004B
Your Price: $77.84
For International trucks.Used to install the front oil seal / wear sleeve.Applications: DT 466/ 570, DT / DTA 360 / 466, DT 466 / 530 (PLN), HT 570, DT 466/ 530E OTC ZTSE3004B Crank Front Oil Seal Installer ...
Add to Cart Details
Pressure Sensor Breakout Harness - International Trucks

Manufacturers Part #: ZTSE4347
Your Price: $89.10
For International trucks.The pressure sensor breakout harness is used to measure voltage and resistance on circuits that go to the EBP-EFP-EOP and MAP sensors.Applications: T 444E, VT 365, DT 466E / 530EMAXXFORCE 5,7,DT9 and 10 OTC ZTSE4347 Pressure Sensor Breakout Harness ...
Add to Cart Details
Timing Pin - DT 466 / 530 (PLN)

Manufacturers Part #: ZTSE4372
Your Price: $38.91
For setting fuel injector pump to engine timing only.The knurled shaft design has been developed to prevent accidental installation of the fuel injection pump gear access cover prior to timing pin removal.Applications: DT 466 / 530 (PLN) OTC ZTSE4372 Timing Pin ...
Add to Cart Details
Rear Oil Seal / Wear Sleeve Installer

Manufacturers Part #: ZTSE4749
Your Price: $665.99Includes Free Shipping
Used to install the crankshaft rear oil seal and wear sleeve.Applications: DT 466E, 530E, DT 466 /570, HT 570(DT.9 and 10) OTC ZTSE4749 Rear Oil Seal / Wear Sleeve Installer ...
Add to Cart Details
Real Oil Seal / Wear Sleeve Installer - DT 466 / 570, HT 570

Manufacturers Part #: ZTSE4637
Your Price: $385.55Includes Free Shipping
Used to install the crankshaft rear oil seal and wear sleeve.Applications: DT 466, 530, DT 466 /570, HT 570(DT.9 and 10) OTC ZTSE4637 Real Oil Seal / Wear Sleeve Installer ...
Add to Cart Details
Fuel Injector Sleeve Remover Navistar DT 466E, 530E, T 444E

Manufacturers Part #: ZTSE4302A
Your Price: $256.85Includes Free Shipping
Navistar DT 466E, 530E, T 444E OTC ZTSE4302A Fuel Injector Sleeve Remover ...
Add to Cart Details
Cam Gear Puller

Manufacturers Part #: ZTSE4411
Your Price: $166.24Includes Free Shipping
A specially designed puller for this difficult pulling application.Applications: DT 466/ 570, DT / DTA 360 / 466, DT 466 / 530 (PLN), DT 466E / 530E, HT 570 OTC ZTSE4411 Cam Gear Puller ...
Add to Cart Details

Customers Also Purchased:

Cam Gear Puller

Manufacturers Part #: ZTSE4411
Your Price: $166.24Includes Free Shipping
A specially designed puller for this difficult pulling application.Applications: DT 466/ 570, DT / DTA 360 / 466, DT 466 / 530 (PLN), DT 466E / 530E, HT 570 OTC ZTSE4411 Cam Gear Puller ...
Add to Cart Details
1/2 In Dr 12-Pt Std Metric Impact Socket Set - 13-Pc

Manufacturers Part #: 2679
Your Price: $37.20
Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Includes heavy molded storage tray. Lifetime Warranty -- full replacement. Includes sizes: 10mm 11mm 12mm 13mm 1...
Add to Cart Details
Crank Front Oil Seal Installer

Manufacturers Part #: ZTSE3004B
Your Price: $77.84
For International trucks.Used to install the front oil seal / wear sleeve.Applications: DT 466/ 570, DT / DTA 360 / 466, DT 466 / 530 (PLN), HT 570, DT 466/ 530E OTC ZTSE3004B Crank Front Oil Seal Installer ...
Add to Cart Details

Customers Also Shopped For:

Fuel Injector Sleeve Remover Navistar DT 466E, 530E, T 444E

Manufacturers Part #: ZTSE4302A
Your Price: $256.85Includes Free Shipping
Navistar DT 466E, 530E, T 444E OTC ZTSE4302A Fuel Injector Sleeve Remover ...
Add to Cart Details
1/2 In Dr 12-Pt Std Metric Impact Socket Set - 13-Pc

Manufacturers Part #: 2679
Your Price: $37.20
Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Includes heavy molded storage tray. Lifetime Warranty -- full replacement. Includes sizes: 10mm 11mm 12mm 13mm 1...
Add to Cart Details
Mechanical Grip-O-Matic(R) Puller - 5 Ton Capacity, 2 Jaw, Re

Manufacturers Part #: 1025
Your Price: $45.09
OTC has developed the most complete line of gear & bearing pullers, enabling you to remove & install parts for fast, effective repairs.Forged from quality steel, heat treated, & subjected to rigorous tests which exceed their rated capacity. Max. Reach 5 1/2" Max. Spread 6" Screw Size 9/16"-20 x 6 15/16" Jaw Thickness Upper 5/16", Lower 1/4" Jaw Width Upper 3/8", Lower 3/4" Weight 2 lbs. WARNING - Always use approved eye protection when using pu...
Add to Cart Details
Spoon Long Curved

Manufacturers Part #: 1054
Your Price: $29.06
Long, thin, curved blade is handy for prying up dents behind curved reinforcements in header panels, hinge anchors in doors, body pillars and reinforcements in hoods and radiator shells. Features: Length 10-1/2" overallFace 2" x 7"Weight 1.5 lbs. Martin Sprocket & Gear 1054 Long Curved Spoon ...
Add to Cart Details
Klik-Fast Blind Rivets - 3/16 In to 1/4 In Aluminum Buttonhead -

Manufacturers Part #: 40235
Your Price: $18.80
Non-stock item.Rivet fasteners are particularly valuable to the body shop operation.All offer one-side application, superior shear and tensile strength.Vibration resistant.Box of 500 Klik-Fast Blind Rivets - 3/16 In to 1/4 In Aluminum Buttonhead - 5/32 In Dia ...
Add to Cart Details
Injection Pump Socket - 1/2 In Drive - Mercedes

Manufacturers Part #: H4556
*this item has been discontinued
1/2" Drive Injection Pump Socket 32 point for R&R of delivery valve of diesel injection pump.For mounting and dismounting the injection pump pipe socket and delivery valve for fuel supply over flow tests.For MERCEDES-BENZ diesel passenger cars, 601, 602, 603, 605, 606, 615, 616, 617MB-No. 617 589 01 09 00S: 17.9x20mmL: 55.5mm ...

Current Reviews: 0

For more information, please visit this product's webpage.

Diesel & Truck Tools > Engine Service Tools > 3/4 In Dr 12 Pt Lower Idler Gear Socket for International - 20

3/4 In Dr 12 Pt Lower Idler Gear Socket for International - 20mm

Related Products

Customers Also Purchased:

Customers Also Shopped For: