The JMD-18 Mill Drill is one of a kind. The one piece cast iron column adds support to tackle various drilling applications. Each mill drill comes equipped with a draw bar, adjustable carbide facemill, worklamp, 360 degree swivel head, and extra large worktable. The JMD-18 is UL listed.
- One-piece cast iron column for added support
- Belt cover "quick slide latch allows faster belt adjustment to change spindle speeds
- Base taper allows for easier clean-up
- Larger hand wheel knobs
- UL Listed motor
- Extra large worktable
- Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth
- New positive quick-stop knob and easy-to-read internal depth gauge (external on JMD-15)
- 360 degree head swivel
- Heavy-duty power downfeed with manual fine feed (JMD-18PFN)
- Three power down feeds (JMD-18PFN .004", .007", .01")
- Worklamp included
- Adjustable carbide facemill
- Drill press angle vise
- 1/2 drill chuck, chuck arbor
- Draw bar included
Specifications:-
Overall Dimensions: L 43" X W 40" X H 44"
- Height: 43.5 inch
- Width: 39.75 inch
- Length: 42.5 inch
- Net Weight: 595 pound
- Gross Weight: 662 pound
- Number of Spindle speeds: 12
- Spindle Taper: R-8
- Quill Diameter : 3"
- Max Distance Spindle to Table: 18"
- Table Longitudinal Travel: 20-1/2"
- Table Cross Travel: 6-1/2"
- T-Slots Number and Size: 4" and 5/8"
- T-Slot Centers: 1-13/16"
- Work Table Weight Capacity: 400 lbs.
- Drilling Capacity: 1-1/4"
- Face Mill Capacity: 3"
- End Mill Capacity: 3/4"
- Swing: 15-7/8"
- Column Diameter: 4-1/2"
- Quill Travel: 5"
- Range of Spindle Speeds: 150-3,000 RPM
- Table Size: 9-1/2" x 32-1/4"
- Base Dimensions: 15-3/4" x 23-3/4"
- Motor: 2HP, 1PH, 115/230V (Prewired 115V)
$85 standard freight fee. Applies to direct shipping points within the 48 continental US states. Rural Area Surcharge may apply.
- *An additional $40.00 will apply to all residential deliveries of heavy-equipment.
- *For lift-gate service, add $135.00.
Manufacturer drop ship. 10-14 day lead time before shipment.
JET 350018 JMD-18 Mill Drill, R-8 Taper, 2HP, 1PH, 115/230V 
07.jpg "Uni-Ram Corp."){kind=small}
