Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Electric Power Tools > Drill Presses > Adjustable Position Electromagnetic Drill Press with 1/2 in. M

Adjustable Position Electromagnetic Drill Press with 1/2 in. Mot

Adjustable Position Electromagnetic Drill Press with 1/2 in. Mot
combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.

Features

  • 1/2 inch capacity, 7.2 amp motor, 600 RPM
  • Solid state electronic switching
  • Feedback speed control
  • Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line

Specifications

Voltage 120 AC
Amps 7.2
Drill Capacity 1/2 in.
No Load Speed 600 RPM
Cord Type 9 ft. Fixed
Construction Type Grounded
Electronic Feedback Yes
Tap Capacity 5/8 in.-18
Drill Point Pressure 1,610/1,650 lbs.
Adjustable Base Yes
Drill Travel 9 in.
Chuck or Taper Chuck
Tool Weight 57.0 lbs.
Shipping Weight 67.5 lbs.

Milwaukee Electric 4204-1 Adjustable Position Electromagnetic Drill Press with 1/2 in. Motor 4204-1

$85 standard freight fee.

  • Shipping Weight: 70lbs
  • Manufactured by: Milwaukee Electric Tools
  • Toolsource #: 107094
  • Manufacturers Part #: 4204-1
  • Also Known As: ML4204-1, MLW4204-1

Special Order
Contact For Details

$1,352.81

Related Products


Customers Also Shopped For:

  • Drill Press Base Adjustable Position
    Drill Press Base Adjustable Position
    Manufacturers Part #: 4203
    Your Price: $985.00Includes Free Shipping
    The electromagnetic variable speed adjustable base features solid state electronic switching and an 11in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. Drill Press Base only; motor sold separately. For use on any flat ferrous material, 1/2in. and thicker120 Volt AC; 12.5 Amp max. ratingSolid state electronic switchingMotor/magnet lockout prevents de-mag during operationFeedback speed controlComputer-con...
  • 4" INDUSTRIAL DRILL PRESS
    4" INDUSTRIAL DRILL PRESS
    Manufacturers Part #: 11674
    Your Price: $50.06
    o Precision machined on for accurate and versatile if usage on the base, sides and end o Durable construction with fine grain cast iron castings and hardened steel jaws o Precision ground for square and parallel accuracy to ?.0001 per inch o Center of the base is open for workholding through the vise o Hardened V Grooved Jaws hold round shaped objects both vertically and horizontally o A durable drill press vise ideal for industrial applications....
  • 13mm Dr Vortex GearRatchet Socket - 3/8 In
    13mm Dr Vortex GearRatchet Socket - 3/8 In
    Manufacturers Part #: 122120GR
    Your Price: $1.22
    For use with .The Vortex(TM) thin wall socket design has the same torque strength as an ordinary socket.Over all height is reduced by as much as 50%, width by 20%.The unique GearRatchet(TM) drive configuration increases torque strength by as much as 40% and needs as little as 5? or arc."Pass through" socket system eliminates the need for deep sockets.Chrome vanadium steel.Fully hardened. KD Tools 122120GR 13mm Dr Vortex GearRatchet Socket - 3/8" ...
  • Serpentine Belt Tool
    Serpentine Belt Tool
    Manufacturers Part #: 59800
    Your Price: $42.47
    Releases tension on serpentine belts with a spring loaded idler pulley.This tool is used to remove and install belts on serpentine belt systems using the spring loaded idler pulley.Fits idler pulleys requiring 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex and both 3/8" and 1/2" square drive sizes.For applications with limited access, 13mm and 16mm sockets are built into the handle.This tool covers most domestic and some import applications.Comes with ex...
  • Portable Air Compressor 1 1/2 HP Electric 8-Gal Tank 115V or 230
    Portable Air Compressor 1 1/2 HP Electric 8-Gal Tank 115V or 230
    Manufacturers Part #: K15A-8P
    Your Price: $817.32
    115V or 230V Please Specify When Placing Order Industrial/Commercial Grade UL Listed 1.5-HP Electric Motor Constant run control set at 105-125 PSI Thermal overload motor protectionHigh quality pilot valve Heavy-Duty Single Stage Cast Iron Pump Made in Somerset, PA USABelt drive design w/ totally enclosed heavy-duty belt guardLarge flywheel for extra cooling and easier start-upDirectional air shroud for reduced pump temperatures 8-Gallon Wheelbar...
  • Prostripe 1/2" x 150' Multistripe Auto Pinstriping Tape Gold Met
    Prostripe 1/2" x 150' Multistripe Auto Pinstriping Tape Gold Met
    Manufacturers Part #: R43216
    Your Price: $14.72
    Prostripe 1/2" x 150' Multistripe Auto Pinstriping Tape Gold Metallic R43216  PROSTRIPE® uses only high performance vinyl in its extensive offering of solid and multistripe roll stripe. Sharpline Converting R43216  Prostripe 1/2" x 150' Multistripe Auto Pinstriping Tape Gold Metallic     ...

Current Reviews: 0