Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Cutting and Threading > Drill Bits - Individual > Cobalt Drill Bit, 3/32 In Diamet

Cobalt Drill Bit, 3/32 In Diameter

Cobalt Drill Bit, 3/32 In Diameter
Cobalt Drill Bit, 3/32" Diameter
  • Overall length 2-1/4".
  • Flute length 1-1/4".
  • Specially designed for drilling stainless steel and other hard, abrasive materials.
  • Designed to withstand high drilling heat.
  • 135 degree split point cuts immediately on contact - no center punch needed.
  • Ideal for contractors, maintenance, machine shops and garages.
    • Shipping Weight: 0.01lbs
    • Manufactured by: Vermont American
    • Toolsource #: 51964
    • Manufacturers Part #: 12656
    • Also Known As: VA12656, VER12656

    Only 2 left in stock - order soon

    $1.27

    Customers Also Purchased:

    Customers Also Shopped For:

    • AutoAnalyzer
      AutoAnalyzer
      Manufacturers Part #: CP7665
      Your Price: $32.95
      This AutoAnalyzer(TM) performs all standard electrical tests for on-car and bench troubleshooting. Locate faulty wiring, test electrical components, engine sensors, ignition and fuel systems and starting/charging system voltage. Pinpoint problem area and determine which components need repair or replacement. Measures AC/DC voltage, DC current and resistanceTests diodes and batteriesTests fuses, switches, solenoids and relays19 Ranges for more acc...
    • Cobalt Drill Bit, 3/16 In Diameter
      Cobalt Drill Bit, 3/16 In Diameter
      Manufacturers Part #: 12662
      Your Price: $2.11
      Cobalt Drill Bit, 3/16" Diameter Overall length 3-1/2". Flute length 2-5/16". Specially designed for drilling stainless steel and other hard, abrasive materials. Designed to withstand high drilling heat. 135 degree split point cuts immediately on contact - no center punch needed. Ideal for contractors, maintenance, machine shops and garages. ...
    • Internal Pulling Attachment - 1 1/2 to 6 In Spread
      Internal Pulling Attachment - 1 1/2 to 6 In Spread
      Manufacturers Part #: 1152
      Your Price: $135.48Includes Free Shipping
      Approved by leading bearing manufacturers.Removes bearing cups, oil seals, bushings, & other parts from blind holes quickly & easily. Designed for use w/ a corresponding OTC Push Puller or slide hammer assembly. Specifications: Jaw Spread : 1 1/2" to 6" Jaw Reach : 4" Internal Thread of Tapped Cross Block : 5/8" -18 Weight : 3 lbs. 8 oz. OTC 1152 Internal Pulling Attachment- 1 1/2 to 6 In Spread ...
    • Retain It Chisel Retainer
      Retain It Chisel Retainer
      Manufacturers Part #: 94100
      Your Price: $11.19
      This is the best chisel retainer available. Two piece safety device for air hammers. Collar fits against stop on .401" Parker shank chisels for 100% contact. Heavy duty steel spring has remover lever. Two parts are available separately - Collar Cat. No. 94200 and Spring Cat. No. 94300. S & G Tool Aid 94100 Retain-It Air Hammer Safety Device ...
    • Air Needle Scaler 1/8 Inch Needles 4600RPM Free Shipping
      Air Needle Scaler 1/8 Inch Needles 4600RPM Free Shipping
      Manufacturers Part #: 125
      Your Price: $181.94Includes Free Shipping
      Free Ground Shipping (Continental USA only) For surface preparation work involving the cleaning or removal of paint, rust, dirt, or weld slag, the Ingersoll-Rand IR125 Needle Scaler is a durable, dependable, economical solution. 19 needles. Each needle 1/8" (3.2mm). 4,600 blows per minute at free speed.Min. Hose Size: 5/16" Specifications: Performance Rating: Standard DutyBore Diameter: 1" (25mm)Stroke Length: 1 1/8" (28.6mm)Ave Air Consumption:...
    • Stud Remover/Installer - 1/2 In Drive - 3/8 In
      Stud Remover/Installer - 1/2 In Drive - 3/8 In
      Manufacturers Part #: 200-3/8
      Multiple ApplicationsAlso Available in AST #202 and #203 Assenmacher AST 200-3/8 1/2" Drive Stud Remover/Installer 3/8" ...

    Current Reviews: 0