What types of CV boot clamps are there, and which tool do I need for each?

CV boot clamps come in several designs, each requiring a specific tool for proper installation and tightening. Common types include single-ear, double-ear, and band-style clamps. Ear-type clamps, like those often found on GM FWD outboard CV joints, require specialized pliers like the Lisle 30500 CV Boot Clamp Pliers designed to crimp the ears. Band-style clamps, sometimes called 'banding' clamps, often require a tensioning tool to tighten the band and then fold it over for a secure fit. GearWrench 3191 is a CV Joint Boot Clamp Tightening Wrench. Always ensure the tool is compatible with the specific clamp type to avoid damage or improper installation.

What is a CV axle 'popper' tool and when is it used?

An axle 'popper' or CV axle puller is a tool designed to quickly and safely dislodge a CV axle from the transaxle or hub assembly. It typically uses a wedge or forked end to apply controlled force behind the CV joint, overcoming the retaining clip or friction holding it in place. These tools are useful when manual removal is difficult or poses a risk of damage to surrounding components. However, always exercise caution to avoid damaging the axle seals or internal transaxle components. Always consult your vehicle's service manual for proper axle removal procedures.

What is a 'Flexx Boot' and how does it differ from a standard CV boot?

A 'Flexx Boot,' such as the Astoria 2000 FB3000, is a type of universal CV boot designed to simplify replacement by eliminating the need to disassemble the CV joint. Made from flexible materials, they can be stretched over the joint and secured with clamps. Unlike traditional CV boots that require complete axle disassembly, Flexx Boots offer a faster repair solution, especially for common boot failures. However, it's crucial to choose the correct size (standard or truck/SUV) and ensure a tight, secure clamp installation to prevent grease leakage and premature failure. While convenient, they may not be suitable for all applications or offer the same lifespan as original equipment boots.

How do I choose the correct size CV boot clamp?

Selecting the correct CV boot clamp size is crucial for a secure and effective repair. The clamp must be properly sized to create a tight seal around the boot and prevent grease leakage. Measure the diameter of the boot where the clamp will be positioned, and choose a clamp that fits within that range. Universal kits may include multiple sizes, while specific replacement boots sometimes include the correct clamps. Over-tightening a too-small clamp can damage the boot, while a loose clamp will not provide a proper seal, so verify fitment before final installation.

What are some best practices for using CV boot clamp pliers?

When using CV boot clamp pliers, ensure the tool is designed for the specific type of clamp you're working with (ear-type or band-style). Position the pliers squarely on the clamp ears or band, and apply even pressure to crimp or tighten. Avoid over-tightening, which can damage the clamp or boot. Some stainless steel band clamps require a specific torque setting, so using a torque wrench with the pliers, as suggested with the Lisle 30600 CV Boot Clamp Pliers, is recommended. Always inspect the clamp after installation to ensure it's securely fastened and the boot is properly sealed.

Are CV joint tools universal, or are there differences between import and domestic vehicles?

While many CV joint tools are designed for broad compatibility, some differences exist between import and domestic vehicles, particularly in clamp types and axle designs. Some import vehicles may use unique clamp designs or require specialized axle pullers due to variations in hub and transaxle configurations. Always research the specific requirements for your vehicle's make and model before selecting tools. While many tools are versatile, checking compatibility ensures you have the right tool for the job and minimizes the risk of damage or improper repair.

When should I replace a CV boot clamp vs. replacing the entire CV boot?

Replacing only the CV boot clamp is appropriate when the existing clamp is damaged, loose, or corroded, but the CV boot itself is still in good condition (no cracks, tears, or leaks). If the boot is damaged, cracked, or leaking grease, it's essential to replace the entire boot to prevent contamination and premature CV joint failure. Ignoring a damaged boot, even with a new clamp, will lead to costly repairs down the road. In some cases, a 'Flexx Boot' such as the Astoria 2000 FB3000 can be used to replace the boot without removing the CV Joint.

Search

Manufacturers [more]

Mopar Essential Tools | 6679 | CV Boot Clamp Pliers

Name: CV Boot Clamp Pliers
Brand: Mopar Essential Tools
SKU: 113922
Price: 57.02 USD
Availability: InStock
Rating: 3 (1 reviews)

larger image

Specifications

Manufacturer: Mopar Essential Tools
Model Number: 6679
Weight: 0 lbs
Dimensions: 0 x 0 x 0 inches

Key Features

Specialized Design: Engineered specifically for the installation and tightening of CV boot clamps.
Durable Construction: Built to withstand the demands of automotive repair environments.
Secure Clamping Mechanism: Provides a firm grip on clamps, facilitating proper tensioning and sealing.
Precision Operation: Designed to correctly seat CV joint boot clamps without damaging the boot material or the clamp itself.

Applications

CV Boot Installation: Used for installing and securing new or replacement constant velocity (CV) boot clamps on drive axles.
Automotive Maintenance: Essential tool for repairing or servicing CV joints and axle assemblies in a wide range of vehicles.
Clamp Type Compatibility: Effectively handles various types of CV boot clamps, including band-type and ear-type clamps.
Professional and DIY Use: Suitable for both professional automotive technicians and individuals performing vehicle maintenance.

Benefits

Ensures Secure Seals: Proper tensioning of CV boot clamps helps prevent the ingress of dirt and moisture, protecting the CV joint from premature wear.
Simplifies Installation: Reduces the effort and complexity associated with installing tight-fitting CV boot clamps.
Extends Component Life: Correctly installed boots maintain the integrity of the CV joint, contributing to longer service life.
Damage Prevention: Minimizes the risk of damaging delicate CV boots or clamps during the installation process, saving time and replacement costs.

Other products
Mopar Essential Tools Homepage
Model: 113922
Manufacturers Part #: 6679
Manufactured by: Mopar Essential Tools
Also Known As: MS6679