What's the difference between a cordless angle grinder and a cordless die grinder?

Cordless angle grinders, like the DeWALT 20V MAX XR, are designed for material removal using larger diameter abrasive discs (typically 4-1/2" to 5"). They're ideal for cutting, grinding, and polishing metal or masonry. Cordless die grinders, such as the Milwaukee M12 FUEL Right Angle Die Grinder, use smaller rotary bits and abrasive points. Die grinders excel at detail work, precision grinding, deburring, and polishing in hard-to-reach areas. Consider an angle grinder for heavy-duty tasks and a die grinder for intricate work.

What is a gator stripping wheel and when should I use it?

A 'gator' or surface conditioning disc is a non-woven abrasive wheel used for removing rust, paint, coatings, and other surface contaminants without significantly altering the base material. These discs, often brown or maroon, are less aggressive than grinding wheels. They are excellent for prepping surfaces for paint, removing gaskets, or cleaning welds. Always start with a light touch and appropriate PPE, such as eye and face protection, as with any abrasive tool.

Can I use a cut-off wheel on my cordless angle grinder?

Yes, you can use a cut-off wheel on a cordless angle grinder, like the Makita 18V LXT, but be sure the wheel's diameter and arbor size match your grinder's specifications. Ensure the wheel is rated for the grinder's RPM. Cut-off wheels are thin and designed for slicing through metal, masonry, or plastic. Always use the correct safety guard for cutting applications and wear appropriate personal protective equipment, including eye, face, and hand protection.

What should I consider when choosing the right size and type of grinding disc for my cordless grinder?

First, verify the maximum disc diameter and arbor size that your cordless grinder can safely accommodate. For general grinding, a thicker, more aggressive disc is suitable. For finer surface finishing, consider a flap disc or a fiber disc with a backing pad. Match the grit to the material; coarser grits remove material faster, while finer grits create a smoother finish. Always check the disc's maximum RPM rating against your grinder's speed.

What are the safety precautions I should take when using a cordless grinder?

Safety is paramount when using any grinder. Always wear appropriate personal protective equipment (PPE), including eye protection (safety glasses or a face shield), hearing protection, and gloves. Ensure the grinding wheel or disc is properly installed and in good condition, with an RPM rating equal to or greater than the tool's maximum RPM. Use the correct safety guard for the application. Avoid applying excessive pressure, which can cause the wheel to shatter. Be mindful of sparks and potential fire hazards.

What is an eraser wheel and when should I use it?

An eraser wheel, also known as a caramel wheel, is a rubber abrasive disc designed to remove decals, stickers, pinstripes, and adhesive residue from automotive surfaces without damaging the paint. They work by gently abrading the adhesive. Use a slow, steady speed and light pressure. While generally safe, it's always wise to test in an inconspicuous area first to ensure compatibility with the underlying surface. Always wear eye protection during use.

How do I choose the right grit for a flap disc on my cordless grinder?

The grit of a flap disc determines its aggressiveness. Lower grit numbers (e.g., 40-grit) are coarser and remove material quickly, ideal for weld blending or heavy stock removal. Higher grit numbers (e.g., 80-grit, 120-grit) are finer and produce a smoother finish, suitable for surface preparation and polishing. Start with a coarser grit if you need to remove a lot of material, then move to finer grits to refine the surface. Always test on a small area first.

Can I use accessories from my pneumatic die grinder on a cordless die grinder?

You can often use accessories interchangeably between pneumatic and cordless die grinders, like the Milwaukee M12 FUEL, but it's crucial to verify compatibility. Ensure the shank size (typically 1/4" or 1/8") matches the collet size of your cordless die grinder. Always check the RPM rating of the accessory and ensure it's rated for or exceeds the maximum RPM of your cordless tool. Never force an accessory into the collet; use only accessories designed for the tool.

Search

Manufacturers [more]

DeWalt 20V MAX XR 4-1/2 to 5 In. Brushless Cordless Angle Grinde

Name: DeWalt 20V MAX XR 4-1/2 to 5 In. Brushless Cordless Angle Grinde
Brand: DeWALT
SKU: 422660
Price: 341.37 USD
Availability: InStock
Rating: 3 (1 reviews)

larger image

Features and Benefits:

Brushless motor delivers up to 1590 maximum watts out and 9000 revolutions per minute no load speed
part of the most powerful 20 volt max angle grinder line
equipped with perform and protect features including anti rotation system
compact body for tight areas
battery and charger sold separately
three year limited warranty

Complete a variety of applications with the 20 volt max XR 4.5 inch to 5 inch angle grinder, battery and charger sold separately. Part of the most powerful line of 20 volt max angle grinders, this tool includes perform and protect features such as the anti rotation system. Engineered with a brushless motor that delivers up to 1590 maximum watts out and 9000 revolutions per minute no load speed, this tool provides confidence for professionals who expect top performance.

Other products
DeWALT Homepage
Model: 422660
Shipping Weight: 4.5lbs
Manufacturers Part #: DCG410B
Manufactured by: DeWALT
Also Known As: DWTDCG410B