Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Drive Train- Transmission > Clutch Service Tools > Roll Pin Installation Removal To

Roll Pin Installation Removal Tool

Roll Pin Installation Removal Tool
  • Eliminates the need for hammer punch.
  • Works well with steel or plastic componates.
  • Removes and installs roll pins on Hydraulic clutch lines up to 1 1/8" long.
  • Body is cut from aluminum bar.
  • Threaded knob molded onto hardened steel threaded shaft.
  • Precision made.
EZ Red PPT13 Roll Pin Installation / Removal Tool
  • Shipping Weight: 0.15lbs
  • Manufactured by: EZ Red
  • Toolsource #: 145964
  • Manufacturers Part #: PPT13
  • Also Known As: EZPPT13, EZR-PPT13, EZRPPT13

Only 1 left in stock - order soon

Inventory available from other suppliers, prices may be different

$13.66

Frequently bought together:

  • Add this item to your cart and save $2.00 when purchased with the product above.
    Discount applied at checkout.

Related Products

  • Master Seal and Clutch Service Tool Set
    Master Seal and Clutch Service Tool Set
    Manufacturers Part #: 91267
    Your Price: $683.20Includes Free Shipping
    Master Seal and Clutch Service Tool Set The set includes all Seal Service Tools contained in 91268 and Clutch Service Tools contained in 91274. Tools are stored in a sturdy tool chest (92275) and organized in two drawers with a chart showing which tools are used for a specific compressor. The top part of the tool chest serves as a storage area for fittings and air conditioning test equipment. Space is reserved in the third drawer for an optional...
  • Master Clutch Service Tool Set
    Master Clutch Service Tool Set
    Manufacturers Part #: 91274
    Your Price: $386.93Includes Free Shipping
    The set contains all the tools needed to service clutches on the following compressors: General Motors A6, R4, and DA66 Pole R4, V5 and HR-6 Ford FS6Chrysler C171Nippondenso 6P 148ASanden 507, 508 and 510Pitts and Warner clutches. Includes: 90291 Coil Puller Jaws90292 Coil Installer90343 Compressor Holding Fixture & Hardware90346 Rotor & Bearing Pilot90349 Clutch Assembly Installer90443 Pulley Bearing Remover & Driver90451 Pulley Arb...
  • 3mm Roll Pin Installing Tool
    3mm Roll Pin Installing Tool
    Manufacturers Part #: 89930
    Your Price: $7.28
    The tip of this tool has a precision machined cavity which holds the 3mm roll pin due to a slight press fit. In operation, the roll pin is easily installed as the tool holds it in place up to the hole it is going into. The roll pin is then pressed in as the tool is struck with a hammer. The tool's grip on the roll pin is then released as the roll pin goes into place. Schley Products 89930 3mm Roll Pin Installing Tool SL89930...
  • 4mm Roll Pin Installing Tool
    4mm Roll Pin Installing Tool
    Manufacturers Part #: 89940
    Your Price: $7.54
    The tip of this tool has a precision machined cavity which holds the 4 mm roll pin due to a slight press fit. In operation, the roll pin is easily installed as the tool holds it in place up to the hole it is going into. The roll pin is then pressed in as the tool is struck with a hammer. The tool's grip on the roll pin is then released as the roll pin goes into place. Schley Products 89940 4mm Roll Pin Installing Tool SL89940...
  • 3/32" Roll Pin Installing Tool
    3/32" Roll Pin Installing Tool
    Manufacturers Part #: 90310
    Your Price: $7.28
    The tip of this tool has a precision machined cavity which holds the 3/32" roll pin due to a slight press fit. In operation, the roll pin is easily installed as the tool holds it in place up to the hole it is going into. The roll pin is then pressed in as the tool is struck with a hammer. The tool's grip on the roll pin is then released as the roll pin goes into place. Schley Products 90310 3/32" Roll Pin Installing Tool SL90310...

Customers Also Purchased:

  • Right Angle Grease Fitting Coupler
    Right Angle Grease Fitting Coupler
    Manufacturers Part #: 418
    Your Price: $7.89
    Fits grease fittings in confined areas, such as for lower ball joints on Chrysler K-cars.Specially designed seal and slot in coupler housing provides 90 degree access into areas where minimal clearance is provided.Fits all standard grease guns - can be used as general purpose grease coupler.Can be used on any grease fitting where space is a problem. Thexton 418 Right Angle Grease Fitting Coupler ...
  • Roll Pin Punch - 1/16 In x 2.75 In
    Roll Pin Punch - 1/16 In x 2.75 In
    Manufacturers Part #: 6151
    Your Price: $10.53
    Roll Pin Punch - 1/16 In x 2.75 In Made in the U.S.A., and hot forged from alloy steel for maximum strength. Hardened and tempered for maximum durability. Black oxided, ground and polished to a smooth metallic shine. Specifications: Tip Size - 1/16" Overall Length - 2.75" ...
  • Roll Pin Punch - 3/32 In x 3.50 In
    Roll Pin Punch - 3/32 In x 3.50 In
    Manufacturers Part #: 6153
    Roll Pin Punch - 3/32 In x 3.50 In Made in the U.S.A., and hot forged from alloy steel for maximum strength. Hardened and tempered for maximum durability. Black oxided, ground and polished to a smooth metallic shine. Specifications: Tip Size - 3/32" Overall Length - 3.50" ...
  • 3/32" Roll Pin Installing Tool
    3/32" Roll Pin Installing Tool
    Manufacturers Part #: 90310
    Your Price: $7.28
    The tip of this tool has a precision machined cavity which holds the 3/32" roll pin due to a slight press fit. In operation, the roll pin is easily installed as the tool holds it in place up to the hole it is going into. The roll pin is then pressed in as the tool is struck with a hammer. The tool's grip on the roll pin is then released as the roll pin goes into place. Schley Products 90310 3/32" Roll Pin Installing Tool SL90310...
  • Roll Pin Punch 5/64"
    Roll Pin Punch 5/64"
    Manufacturers Part #: 6152
    Designed to apply consistent pressure to the end of a pin, driving a straight through the hole. The ball centered on the punch tip assures proper contact, eliminating damage to the pin or hole wall. Strength and precision straight through the hole Ball center assures proper contact Diamond knurled grip for sure handling. Made in the USA Lifetime Warranty SK Hand Tools 6152 Roll Pin Punch 5/64" ...

Customers Also Shopped For:


Current Reviews: 0