Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Drive Train- Transmission > Clutch Service Tools > Flywheel Holding To

Flywheel Holding Tool

Flywheel Holding Tool
Applications: GEN 3 ENGINE, C/K, F, Y CAR
  • J 42386-A is designed to hold the engine stationary while the damper bolt is being torque.
This item may not be in stock; please email service@toolsource.com for cost and lead time before ordering.

Kent-Moore J-42386-A Flywheel Holding Tool
  • Shipping Weight: 1lbs
  • Manufactured by: Kent-Moore
  • Toolsource #: 112119
  • Manufacturers Part #: J-42386-A
  • Also Known As: KMJ42386-A, OTC-J-42386-A

Usually In Stock
Usually ships in 24-48 hours
Manufacturer Direct

$126.94

Related Products


Customers Also Purchased:

  • Balancer and Timing Sprocket Installer GM CTS-V, Corvette ZR1
    Balancer and Timing Sprocket Installer GM CTS-V, Corvette ZR1
    Manufacturers Part #: J-41665-A
    Your Price: $100.54Includes Free Shipping
    Superceded Tool Number: J-41665 GM Reference Number: EN-41665-A Applications: CTS-V, Corvette ZR1 2009 supercharged 6.2L V8 engines use a keyway to locate the balancer, and the timing sprocket and balancer must be installed over this keyway. J-41665-A is slotted to fit over this keyway, and is used with the forcing screw and hardware from either J-41478 Front Seal Installer or EN-47812 Front Seal Installer Bolt to seat the lower timing gear spro...
  • Front Oil Seal Installer Smallblock V8
    Front Oil Seal Installer Smallblock V8
    Manufacturers Part #: J-41478-A
    Your Price: $129.52Includes Free Shipping
    Smallblock V8 engines utilize a Teflon lipped front seal. When installed correctly the seal provides superior oil containment. It must be drawn squarely into the bore of the front cover and carefully to avoid damage to the inner lip. Non-stock item, manufacturer drop ship; please email service@toolsource.com for cost and lead time before ordering. This is a non-quoted item and the price fluctuates; we have to get pricing each time an order is pl...
  • Crankshaft Balancer Remover
    Crankshaft Balancer Remover
    Manufacturers Part #: J-41816
    Your Price: $175.53Includes Free Shipping
    Crankshaft Balancer Remover J-41816 Tool Number: J-41816 Tool Name: Crankshaft Balancer Remover Applications: GEN 3 ENGINE F, Y-CAR The balancer on the LSI engine is not keyed to the crankshaft and is therefore a very high load press fit. It must be removed by pulling directly on the hub, not on the outer edge of the balancer. Kent-Moore KM J-41816 Crankshaft Balancer Remover ...
  • Harmonic Balancer Puller OTC 6667
    Harmonic Balancer Puller OTC 6667
    Manufacturers Part #: 6667
    Your Price: $65.98
    Designed for removing damper pulleys in tight engine compartments, without removing the radiator. Packaged in cardboard box, does not include plastic case. Use on the following: GM 2000 Generation III 4.8L, 5.3L, 5.7L 6.0L, and 8.1L V8s. Also works on Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988. Chevrolet trucks 2003-later 4.2L I6, 2004-current 3.5L I5 and 2005-current 2.8L I4. Chrysler engines from 1990-later, including 2.0L, 2.4L-4s; plu...
  • 1/2 Inch Drive Torque Angle Gauge
    1/2 Inch Drive Torque Angle Gauge
    Manufacturers Part #: 3336
    Your Price: $20.03
    KD Tools 3336 Features: Use with a 1/2" drive tool to install various engineering fasteners that require a specified angle application after a pretorque load has been applied. Tool is calibrated in 5? increments with a rotating pointer. 1/2" male and female square drive and an adjustable holding rod hold the gauge in position during use. Gauge is packaged in a convenient storage pouch. KD Tools 3336 Torque Angle Gauge ...
  • 1/2 In Dr 12-Pt Fractional Standard Length Impact Socket - 1-1/1
    1/2 In Dr 12-Pt Fractional Standard Length Impact Socket - 1-1/1
    Manufacturers Part #: 2134R
    Your Price: $6.61
    Dimensions: Drive End: 1.42"Socket End: 1.50"Bolt Clearance Depth: 1.35"Hex Depth: .79"Overall Length: 1.97" Image shown may not be actual product but represents product or set which includes product. Grey Pneumatic 2134R 1/2" Drive 12-Point Fractional Standard Length Impact Socket - 1-1/16" ...

Customers Also Shopped For:

  • Clutch Alignment Tool
    Clutch Alignment Tool
    Manufacturers Part #: DT-50194
    Your Price: $85.20
    The clutch disc must be centered to the flywheel to allow the manual transmission to be installed.DT-50194 has the correct diameters to fit into the crankshaft bore and the clutch spline minor ID for perfect alignment of the disc. Manufacturer drop ship; please email service@toolsource.com for lead time. Bosch Kent-Moore DT-50194 Clutch Alignment Tool ...
  • Worm Gear Type Tube Bender
    Worm Gear Type Tube Bender
    Manufacturers Part #: 600-F
    Your Price: $1,725.85Includes Free Shipping
    Gear Type Tube Bender For Aircraft Grade Stainless Steel and All Other Metal Tubing of Bending Temper Used for: 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4" outer diameter tubing Precision tool for highest quality work. Worm gear type with 50-to-1 ratio and crank with revolving hand grip. Keeps effort at a minimum. Follow bar eliminates drawing action and keeps tube in virtually perfect round. Adjustable pressure roller positions quickly in index holes...
  • GearWrench 81205 Universal and Adapter Set - 10-Pc
    GearWrench 81205 Universal and Adapter Set - 10-Pc
    Manufacturers Part #: 81205
    Your Price: $100.84Includes Free Shipping
    The GearWrench 81205 is a complete set of the most common universals and adapters in chrome and black oxide.Each piece will allow you with great reach and access into obstructed areas.Comes with a durable carrying case to keep your set organized.Adapters allow you to reach into tighter spaces with ease. Includes the following part numbers: 80100 Universal Joint 1/4" Dr.80549 Universal Joint 3/8" Dr.80101 Impact Universal Joint 1/4" Dr.80548 Impa...
  • Wr Clamp
    Wr Clamp
    Manufacturers Part #: 0400
    Your Price: $254.58Includes Free Shipping
    Self-Tightening. Ultra-wide gripping surface. Grabs 4 1/4" of metal. Original wedge. Original straight cut tooth design. Gripping surface: 4 1/4" wide (108 mm), 1" deep (25 mm). Overall length: 9 1/2" (241 mm). Weight: 11 lbs. (4.99 kg). Capacity: 6 tons (5,443 kg). ...
  • AccuTorq Users Chart - Color Coded
    AccuTorq Users Chart - Color Coded
    Manufacturers Part #: 10-0103
    Your Price: $1.79
    Includes list of AccuTorq products, as well as a long list of vehicles with lug nut size, torque and which AccuTorq should be used on that vehicle.Part number is generic, most recent chart available will be sent.PDF version of this chart is available by clicking the link below. AccuTorq Color Coded Users Chart 10-0103 ...
  • AST T 40057 Oil Filter Housing Drain VW Audi
    AST T 40057 Oil Filter Housing Drain VW Audi
    Manufacturers Part #: T40057
    Prevents spillage during oil filter change and allows for drainage of oil from the filter housing. Used for draining the oil filter housing on 2005.5-2008 VW/Audi models with the new 2.0L Turbo and the 2.5L inline 5cyl VW engine.Easy to use. Assenmacher T 40057 Oil Filter Housing Drain - VW / Audi ...

Current Reviews: 0