Shopping Cart 0 items
Your cart is empty.
  • Serving over 30 Million Customers
Your Professional Tools Authority

Automotive Specialty Tools > Brake System > Caliper Tools > Disc Brake Pad Spreader - D79L-2196

Disc Brake Pad Spreader - D79L-2196-A

Disc Brake Pad Spreader - D79L-2196-A
Disc Brake Pad Spreader No longer must disc brake pad installation be difficult. The No. 7034 fits between the two new pads being installed, then expands to retract the piston. Leaves both hands free to start the caliper over the rotor. After it`s started, the spreader is removed and you slide the caliper over the rotor the rest of the way. Cuts installation time dramatically. Works on all standard and four-piston caliper disc brakes. No. 7034 - Disc brake pad spreader. Wt., 10 oz.
  • Same as Ford No. D79L-2196-A.

    • Shipping Weight: 0.3lbs
    • Manufactured by: OTC Tools and Equipment
    • Toolsource #: 61836
    • Manufacturers Part #: 7034
    • Also Known As: OT7034, OTC-7034, OTC7034

    Only 6 left in stock - order soon

    Inventory available from other suppliers, prices may be different

    List Price: $33.00
    You save: $5.93

    Frequently bought together:

    • Add this item to your cart and save $4.06 when purchased with the product above.
      Discount applied at checkout.

    Customers Also Purchased:

    • OTC 7661 Brake Caliper Hanger Set
      OTC 7661 Brake Caliper Hanger Set
      Manufacturers Part #: 7661
      Your Price: $14.35
      The next time a job requires removing either front or rear disc brakes, these hangers will pay for themselves in convenience alone.Any time there`s brake, wheel bearing, axle shaft, or suspension service to do, these hangers hold the brake calipers out of the way, & at the same time, prevent damage to the brake hose.Weight: 8 oz. OTC 7661 Brake Caliper Hanger Set ...
    • 7401-7 Ultra High Leverage Diagonal Cutter 74 01 180 - 7 In
      7401-7 Ultra High Leverage Diagonal Cutter 74 01 180 - 7 In
      Manufacturers Part #: 7401180
      Your Price: $33.73
      Cutting edges induction hardened(64 HRC) and factory tested.Fixed, forged-on axle rivet.Designed for effortless cutting of piano, hard and soft wire. Knipex 7401-7 7" Ultra High Leverage Diagonal Cutter 74 01 180 ...
    • Pilot Bearing Puller
      Pilot Bearing Puller
      Manufacturers Part #: 9001
      Your Price: $19.64
      Pilot Bearing Puller This item supersedes SK 92522 When working space is limited, this type of puller is needed to remove flywheel pilot bearings from autombiles, trucks, and tractors.Only 7 1/2" long.Can also be used to pull bearings or bushings from generators or starters.Includes 1/2" to 1 1/4" ID Capacity jaws.Strength - helps pull out tough bearings.Short length - allows reach into tighter areas.Versatility - works on automobiles, trucks, a...
    • One-Man Brake Bleeder Hose
      One-Man Brake Bleeder Hose
      Manufacturers Part #: 4599
      Your Price: $7.28
      Removes air from brake system-one wheel at a time- and eliminates the need for an assistant to help do the job. Hose easily attaches to bleeder screw, which holds hose in place and prevents leaking. Check-valve on end of hose prevents air from entering brake system when pumping brake pedal. OTC 4599 One-Man Brake Bleeder Hose ...
    • Locking C Clamp w/ Regular Tip 6 Inch VGP6R
      Locking C Clamp w/ Regular Tip 6 Inch VGP6R
      Manufacturers Part #: 6R
      Your Price: $11.03
      6"/150mm locking clamp with regular tip.Jaw adjustment 0 - 2"/0 - 50mm.Throat depth: 1-1/2" (38mm). Jaws open wide to take on more - wide-opening jaws provide greater versatility in clamping a wide variety of shapes. Powerful locking mechanism. Adjusting screw gives exacting pressure - simply turn the adjustment screw to change jaw opening and clamping pressure.Stays adjusted for repetitive use. Guarded release helps keep work fast and safe - g...
    • Fan Clutch Wrench Kit - 3 Pc
      Fan Clutch Wrench Kit - 3 Pc
      Manufacturers Part #: 3472
      Your Price: $54.95
      Features: Includes universal pulley holder plus two fan clutch wrenches.Use to remove and replace thermostatic fan assemblies while eliminating the need for various-sized holding wrenches.Use on Ford trucks with 2.8, 2.9, 3.0, 4.0, 4.9 and 5.0-L engines.Use on Dodge trucks with 3.9, 5.2, 5.9 and 8.0-L as well as V10 engines.Use on GM trucks with 4.3, 5.0 and 5.7-L engines.Use on Jeeps with 5.2-L engines. KD Tools 3472 3-Piece Fan Clutch Wrench K...

    Customers Also Shopped For:

    Current Reviews: 0